Vszerda SP100A-1123XST.GN 115V AC 120x120x38mm case fan 1800 RPM 50 dB 2-Pin
115 V AC axial fan, 120 × 120 × 38 mm, 1800 RPM, 50 dB, two-pin connector
- 115 V AC power for direct mains connection
- 1800 RPM airflow at 50 dB noise
- 120 mm square frame fits standard mounts
- 38 mm thickness for high-static-pressure cooling
- 2-pin connector enables simple installation
Replacement cooling fan for industrial equipment
This Vszerda SP100A-1123XST.GN is a 115V AC axial fan built to replace damaged cooling units in servers, workstations and other enclosures. It matches the original Sunon part number and fits the same 120x120x38mm mounting footprint. Installers should verify the part number against the confirmation picture before fitting.
115V AC voltage and 2-pin power connector
The fan operates on 115 volt alternating current at 50/60Hz and draws 0.26/0.24A depending on line frequency. A two-pin connector supplies power directly from mains-rated wiring. No PWM or voltage-control wire is present, so speed is fixed at the rated value.
1800 RPM airflow at 50 dB and 2 watts
At full speed the rotor turns at 1800 RPM while consuming approximately 2 watts of power. The supplier rates acoustic output at 50 dB under normal running conditions. This noise level suits equipment rooms or rack cabinets where moderate background sound is acceptable.
How it compares
Measured against everything we stock in PC Cooling Fans, at today’s prices. Recalculated every night.
- Price $44.99
- Pricier than about 87% of the 8,339 comparable items (median $19.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
What does 1800 RPM mean for actual airflow inside a case?
At 1800 RPM the fan moves a moderate volume of air through a 120 mm frame, suitable for general chassis ventilation or spot cooling on a heatsink.
The fan runs on 115 V AC at 50/60 Hz — what does that cap in practice?
It ties the fan to mains voltage, so speed is fixed at 1800 RPM and cannot be PWM-controlled or voltage-regulated by a motherboard header.
Will the 120x120x38 mm frame and 2-pin lead fit my standard 120 mm mount?
Yes, the 120 mm square footprint matches common case mounting holes, but the 38 mm thickness needs clearance and the 2-pin plug requires a 115 V AC source, not a 12 V DC header.
More in PC Cooling Fans
Similar items
ASUS 90DA00D0-B08020 TUF Gaming TR120 ARGB Reverse 120mm 28mm Triple Pack Case Fan
- 120 mm
- 3 Fans
Phanteks PH-F140M25R_G2_DBK01_3P 140mm case fan 3-pack
- 3 Fans
- No Controller
Lian Li 14RSLIN1B 140 mm case fan, black, ARGB, 1600 rpm, 72.7 CFM, 28 dBA
- 140 mm
- 1 Fan





