Vszerda USB 2.0 Mini 5Pin Male to USB 3.0 Micro-B Female Screw Mount Cable 50cm

Mini 5-Pin Male to Micro 3.0 Type-B Female Adapter

This 50cm cable bridges a USB 2.0 Mini 5-pin male plug to a USB 3.0 Micro-B female port with screw-mount holes. It lets devices equipped with the older Mini connector attach to a Micro 3.0 receptacle while operating at USB 2.0 speeds. The copper conductors support two-way data transfer up to 480Mbps. A single-piece moulded shell adds mechanical durability for repeated mating cycles.

Replaces Loose Dongles or Direct Plug Stress

The screw-mount holes on the Micro-B female end secure the connection against vibration or accidental pulling, which a simple gender changer cannot do. The half-metre tail moves the strain point away from the device port, reducing wear on soldered board connectors. The jump is worth it when the Mini port is recessed, the mating cable is heavy, or the equipment sees frequent connect-disconnect cycles in field or bench use.

Limited to USB 2.0 Throughput on a 3.0 Socket

Although the female side accepts a USB 3.0 Micro-B male plug, the Mini 5-pin male side carries only the USB 2.0 signal set, capping throughput at 480Mbps. SuperSpeed pins on the 3.0 plug remain unused, so attached storage or cameras will not reach their native 5Gbps rate. The cable also supplies no additional power beyond what the host Mini port provides, so bus-powered 3.0 peripherals requiring higher current may not enumerate.