Vszerda USB 2.0 Type-A to Type-B Flat FPC Cable 13cm
Connects USB 2.0 Type-B devices to a Type-A port with a 13 cm flat FPC cable supporting 480 Mbps data transfer
- USB 2.0 data at 480 Mbps for reliable peripheral links
- 13 cm flat FPC cable fits tight spaces inside enclosures
- Type-A to Type-B connectors match scanners, disks and printers
- Soft flexible design suits brushless gimbal and camera setups
- New condition ensures clean contacts and full signal integrity
Flat FPC cable for USB 2.0 peripherals
This 13 cm flat FPC cable connects USB 2.0 Type-A male to USB 2.0 Type-B male ports. It serves scanners, disk enclosures, printers and brushless gimbal cameras that need a slim, flexible link. The thin profile fits tight spaces where round cables cannot route easily. It is built for new installations that demand a compact data path.
Sustained 480 Mbps data transfer
The cable carries USB 2.0 data at 480 Mbps without active electronics or signal boosters. Its flat construction keeps impedance stable over the full 13 cm length during continuous reads or writes. No power delivery or higher-speed protocols are supported, so throughput stays at the USB 2.0 ceiling. Heat buildup is negligible because the conductors carry only low-voltage signalling current.
Simple plug-in with orientation care
Both ends are keyed Type-A and Type-B plugs that insert in one direction only. The flat ribbon has no latch, so a firm straight push seats the connectors fully. Misalignment is the common error: forcing the plug at an angle bends the exposed pins inside the Type-B shell. Route the ribbon away from sharp edges to prevent the thin insulation from abrading over time.
How it compares
Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.
- Price $11.99
- Cheaper than about 80% of the 15,227 comparable items (median $14.99).
Specifications
No published specifications for this item yet.
Questions about this item
Does the 13 cm flat FPC cable run hot or draw extra power when left connected all day?
The cable is passive and carries only USB 2.0 data at 480 Mbps, so it generates no measurable heat and adds no power draw beyond the connected devices.
What ports must my scanner or printer already have for this 13 cm cable to work?
One device needs a USB 2.0 Type-A port and the other a USB 2.0 Type-B port; the cable plugs directly into both without adapters.
Will this 13 cm flat cable work reliably with an older USB 1.1 scanner I still use?
Yes, USB 2.0 is backward compatible, so the cable will carry data at the older device's maximum speed.
More in USB Cords & Extension Cables
Similar items
Nippon Labs USB-15-MF-BK USB 2.0 A Male to A Female Extension Cable 15 ft
- USB A to USB A
- USB 2.0 Extension C…
STARTECH UUSBHAUB6LA USB 2.0 A to Left Angle Micro USB B Cable
- USB A to Micro USB
- USB 2.0
STARTECH USB3SEXT1M USB 3.0 extension cable 3.28 ft
- USB A to USB A
- Data Transfer Cable
ESTONE PQ001 USB4 Gen 3x2 cable 1.5ft 40Gbps 240W 8K@60Hz Copper
- USB C to USB C
- USB4





