We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small rectangular adapter with metallic finish, Type-E 20-pin male plug, two 9-pin female headers and short cable

Vszerda

Vszerda USB 3.1 Type-E 20Pin to USB 2.0 2×9pin Hub Adapter

SKU CH-E9RV-VXW28

Converts a motherboard USB 3.1 Type-E header to two USB 2.0 9-pin ports with 480 Mbps speed and 500 mA power each

  • Rated speedType-E to USB 2.0 to Motherboard 9pin
  • Connection typeUsb 2.0
  • Connector count1
  • Connector detailsUsb 2.0
  • Connector genderType-E to USB 2.0 to Motherboard 9pin
  • Apple compatibilityUsb 2.0
  • Convert a 20-pin Type-E header to two 9-pin USB 2.0 ports
  • Built-in USB 2.0 hub chipset delivers 480 Mbps throughput
  • Each port supplies DC 5 V at 500 mA for connected devices
  • Compact plug-in design fits directly onto the motherboard header
  • Adhesive backing secures the adapter to the board or chassis

USB 3.1 Type-E 20Pin adapter for front-panel

This adapter converts a motherboard USB 3.1 Type-E 20-pin header into two USB 2.0 9-pin or 10-pin connectors. It targets PC builders who need extra internal USB 2.0 ports for front-panel headers, card readers or other low-speed devices. The kit includes an adapter, a cable and a small PCBA with a built-in USB 2.0 hub chipset. Buyers who require USB 3.0 or 3.1 data rates on the new ports cannot use this product.

Sustained-load behaviour with 480 Mbps hub chipset

The onboard USB 2.0 hub chipset limits each downstream port to 480 Mbps and 500 mA at 5 V. Under continuous file transfers or multiple device traffic the aggregate throughput stays at USB 2.0 speeds because the hub does not negotiate higher signalling. No active cooling is present, so the PCBA relies on case airflow; extended heavy use does not change the electrical limits.

Direct plug-in install with adhesive mounting

The compact adapter plugs straight into the Type-E header without extra brackets or screws. A peel-off adhesive pad on the PCBA lets you stick it to the motherboard tray or chassis floor for a tidy fit. The only common issue is accidentally reversing the 9-pin connector orientation; the keyed header prevents damage but the port will not enumerate until seated correctly.

How it compares

Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.

Price $17.99
Pricier than about 70% of the 15,227 comparable items (median $14.99).

Specifications

Product
Brand nameXiwai
Model nameU2-066+UC-010-AF-XY
Product typeUSB 2.0
Product colorMetallic
Performance
Rated speedType-E to USB 2.0 to Motherboard 9pin
Ports & slots
Connection typeUsb 2.0
Connector count1
Connector detailsUsb 2.0
Connector genderType-E to USB 2.0 to Motherboard 9pin
Size & build
Conductor typeCopper
Build detailsCopper
Compatibility
Apple compatibilityUsb 2.0

Questions about this item

Does the adapter generate noticeable heat or noise when running continuously at 480Mbps?

The adapter uses a passive USB 2.0 hub chipset with no moving parts, so it produces no audible noise and negligible heat during all-day operation at 480Mbps.

What motherboard header must I already have free to install this adapter?

You need an available USB 3.1 Type-E 20-pin front-panel header on the motherboard; the adapter plugs directly into that header.

Will my existing USB 2.0 9-pin front-panel cables work with the two 9-pin outputs on this adapter?

Yes, each of the two 9-pin female headers provides a standard USB 2.0 9-pin interface compatible with existing front-panel USB 2.0 cables and devices.

More in USB Cords & Extension Cables

Similar items