We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Brass dielectric union with zinc-plated steel nut and polysulfone insulator

Watts

Watts 3/4 LF 3001A-3/4 Dielectric Union Trap

SKU CH-WTA5-74ER8 MPN 3/4

Connects dissimilar metals in plumbing systems using a brass and zinc-plated steel dielectric union rated for 250 psi and 33 to 180 degrees F

  • Product typeDrain Components
  • Prevents galvanic corrosion with brass and zinc-plated steel construction
  • Handles 250 psi maximum operating pressure for reliable performance
  • Operates from 33 to 180 degrees Fahrenheit across varied conditions
  • Polysulfone insulator and Buna-N gasket ensure durable sealing
  • 2 1/8 inch overall length fits standard 3/4 inch connections

Dielectric Union for Dissimilar Metals

The Watts LF 3001A dielectric union connects 3/4 inch female NPT threads to 3/4 inch female solder joints. Its brass body with zinc-plated steel nut and polysulfone insulator prevents galvanic corrosion between copper and steel piping. Buna-N gaskets seal the joint across a 33 to 180 degrees F range at up to 250 psi working pressure.

Installation Notes

Sweat the solder end to copper pipe before assembling the union to avoid heat damage to the polysulfone insulator and Buna-N gasket. Apply thread sealant only to the NPT threads. Over-tightening the zinc-plated nut can crack the insulator, while insufficient tightening leaks under pressure. The 2 1/8 inch overall length fits tight runs but leaves little room for error.

Suitable Applications

This union suits residential and light commercial water lines joining copper to galvanised or steel pipe where dielectric separation is required by code. It is not for gas service, steam lines or temperatures above 180 degrees F. Installers needing a sweat-to-sweat or threaded-to-threaded dielectric fitting should select a different model.

How it compares

Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.

Price $18.99
Cheaper than about 67% of the 4,240 comparable items (median $31.99).

Specifications

Product
Brand nameWatts
Model name3/4 LF 3001A-3/4 in
Product typeDrain Components

Questions about this item

How do I confirm the Watts 3001 dielectric union is sealing correctly after installation?

Pressurise the line up to 250 psi and inspect the Buna-N gasket and polysulfone insulator for leaks; the joint should hold pressure between 33 and 180 °F without weeping.

What comes with the Watts 3001 dielectric union and what must I supply?

The union includes the brass body, zinc-plated galvanised steel nut, Buna-N gasket and polysulfone insulator; you must provide 3/4 in NPT female pipe threads and 3/4 in copper tubing for the solder connection.

Which Watts 3001 version should I choose for a 3/4 inch copper-to-steel transition?

Select the 3/4 LF 3001A-3/4 model — it is the only version listed and matches 3/4 in FIP by 3/4 in solder with a 250 psi rating and 33 to 180 °F range.

More in Drain Stoppers, Strainers & Traps

Similar items