We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Transparent float valve assembly with bronze body and brass rod, 11 in mounting

Watts

Watts C1/4TFAE Float Valve Assembly 1/4 in Compression 11 in Mounting

SKU CH-4QVW-CBBJ8

Controls water level in evaporative coolers with a 1/4-inch compression connection and 11-inch mounting bulkhead

  • Product colorTransparent
  • Precise water-level control with 11 in bulkhead mounting
  • Reliable shut-off up to 100 psi operating pressure
  • Consistent flow rates of 1.5 gpm at 50 psi and 3 gpm at 100 psi
  • Durable bronze body and brass rod resist corrosion
  • Polyethylene float withstands temperatures up to 140 Degrees F

Valve assembly for evaporative coolers

This float valve assembly controls water level in evaporative cooling systems using a 1/4 inch compression connection. The bronze body and brass rod provide corrosion resistance for continuous water service. A polyethylene float operates the valve mechanically without external power. The unit mounts through an 11 inch bulkhead for tank or reservoir installation.

Flow response at varying supply pressure

At 50 psi supply pressure the valve passes 1.5 gallons per minute, rising to 3 gallons per minute at 100 psi. The maximum rated pressure is 100 psi and the maximum water temperature is 140 degrees Fahrenheit. The valve modulates flow as the float rises and falls, maintaining level without pressure spikes. Sustained operation stays within these pressure and temperature limits.

Bronze body with compression and bulkhead mounting

The bronze valve body and brass rod withstand long-term exposure to mineral-rich water. A 1/4 inch compression fitting connects supply tubing without soldering. The 11 inch bulkhead mounting spans the tank wall and secures with a 3/4 inch thread. The transparent polyethylene float allows visual confirmation of position during routine checks.

How it compares

Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.

Price $26.99
Cheaper than about 56% of the 4,240 comparable items (median $31.99).

Specifications

Product
Brand nameWATTS
Product colorTransparent

Questions about this item

How much heat does the Watts C1/4TFAE float valve assembly generate when it runs continuously?

The valve body is bronze and the float is polyethylene, so the assembly itself produces no measurable heat during normal operation.

What existing plumbing connections are required to install this 1/4 in compression float valve?

You need a 1/4 in compression fitting on the supply line and an 11 in by 3/4 in bulkhead opening for the mounting flange.

Will the 1/4 in -20 brass rod thread match the float arm on my older evaporative cooler?

The rod uses a standard 1/4 in -20 thread, which is common on many legacy cooler float arms, but verify your existing arm thread pitch before installing.

More in Drain Stoppers, Strainers & Traps

Similar items