Seagate BarraCuda ST3000DM008 3TB 7200 RPM 64MB SATA 6.0Gb/s 3.5" internal hard drive
- 3 TB
- SATA 6.0Gb/s
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
160 GB 7200 RPM desktop drive with 8 MB cache and SATA 3.0 Gb/s interface
This Western Digital Blue WD1600AAJS is a 160 GB, 7200 RPM desktop drive with 8 MB cache and a SATA 3.0 Gb/s interface. The 3.5 inch form factor fits standard drive bays in older towers or secondary storage arrays. It is sold as a bare drive without cables or brackets. Average seek time is 8.9 ms and average latency is 4.2 ms.
This drive suits users needing a direct replacement for a legacy SATA boot or data drive in an older desktop or DVR. It is not for builders who need higher capacity, faster throughput, or a modern SATA 6 Gb/s interface for current platforms.
The SATA 3.0 Gb/s interface is the single specification that decides compatibility. Verify that the host controller or motherboard supports this generation; a SATA 6 Gb/s port will negotiate down, but an older SATA 1.5 Gb/s port will limit throughput.
Measured against everything we stock in 3.5-Inch Internal Desktop HDDs, at today’s prices. Recalculated every night.
New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Western Digital |
| Product line | Blue |
| Model name | WD1600AAJS |
| Total capacity | 160 GB |
| Recommended use | For Daily Computing |
| Performance | |
| Rotational speed | 7,200 RPM |
| Average seek time | 8.9 ms |
| Mean latency | 4.2 ms |
| Storage | |
| Flash memory type | Desktop |
| Cache memory | 8 MB |
| Ports & slots | |
| Interface type | SATA 3.0Gb/s |
| Size & build | |
| Form factor | 3.5 in (8.89 cm) |
| Shipping weight | 0.91 kg |
| Package size | 305 × 229 × 102 mm |
Mount the 3.5" drive in a desktop bay, connect a SATA data cable to the motherboard and a SATA power connector from the PSU; the step often missed is setting the BIOS to AHCI mode for the SATA 3.0Gb/s interface.
No routine maintenance is required; the mechanical 7200 RPM motor and bearings will eventually wear, so plan to replace the drive when SMART reallocated-sector counts rise or seek times exceed the 8.9ms spec.
The 8MB cache fills quickly during long sequential writes, forcing the 7200 RPM platters to throttle to the native 4.2ms latency and 8.9ms seek time, which becomes the throughput bottleneck.
More in 3.5-Inch Internal Desktop HDDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?