Seagate BarraCuda ST8000DM004 8TB 5400 RPM 256MB SATA 3.5" internal hard drive
- 8 TB
- SATA 6.0Gb/s
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
26 TB 3.5" SATA hard drive with 7200 RPM, 512 MB cache and CMR technology for 550 TB yearly workloads
The Western Digital Ultrastar DC HC590 delivers 26TB on a 3.5-inch SATA 6.0Gb/s interface. Its CMR recording method and 512MB cache suit servers and storage arrays that need sustained write throughput. The drive is rated for 550TB per year and a 2.5M-hour MTBF, targeting workloads that exceed typical desktop limits.
An 11-disk helium platform keeps the 26TB capacity inside the standard 3.5-inch footprint. Hot-swap support means the drive can be inserted or removed from compatible backplanes without powering down the enclosure. The SATA 6.0Gb/s connector follows the familiar data and power pinout used in rackmount chassis and external drive bays.
Retail or OEM packaging may vary, so the box contents are not guaranteed beyond the drive itself. No additional cables, mounting rails or management software are specified by the manufacturer. Buyers should verify accessory requirements with their enclosure or controller vendor before installation.
Measured against everything we stock in 3.5-Inch Internal Desktop HDDs, at today’s prices. Recalculated every night.
New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Western Digital |
| Product line | Ultrastar DC HC590 |
| Model name | WUH722626ALE6L4 |
| Part number | 0F65672 |
| Total capacity | 26 TB |
| Performance | |
| Rotational speed | 7,200 RPM |
| Storage | |
| Cache memory | 512 MB |
| Recording method | CMR |
| Ports & slots | |
| Interface type | SATA 6.0Gb/s |
| Size & build | |
| Form factor | 3.5 in (8.89 cm) |
The SATA 6.0Gb/s link caps sustained transfers at roughly 600 MB/s, so the 7200 rpm 26TB drive will hit that ceiling on sequential reads and writes.
The 3.5-inch form factor with 11 internal disks fits standard 3.5-inch hot-swap bays; ensure the chassis supports 26TB CMR drives and provides adequate airflow for 550 TB/year workloads.
Slide the drive into the bay until the SATA connector seats firmly, then secure the latch; the step often missed is verifying the carrier key aligns so the drive reports 26TB to the controller.
More in 3.5-Inch Internal Desktop HDDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?