Seagate BarraCuda ST8000DM004 8TB 5400 RPM 256MB SATA 3.5" internal hard drive
- 8 TB
- SATA 6.0Gb/s
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
1 TB desktop drive spins at 7200 RPM with 32 MB cache over SATA 3.0 Gb/s
The Western Digital WD10EADS is a 1TB 3.5-inch desktop hard drive designed for bulk storage in servers and quiet workstations. Its 7200 RPM spindle and 32MB cache suit high-capacity archiving and multimedia libraries rather than low-latency boot duties. Buyers who want faster random access for an operating system should consider a solid-state alternative.
The bare drive uses a SATA 3.0Gb/s interface and standard 3.5-inch mounting holes, so it fits any desktop bay or hot-swap tray that accepts full-height units. GreenPower technology lowers operating temperature and acoustics, while IntelliPark unloads the heads during idle periods to reduce wear. No screws, cables or mounting brackets are included with the bare drive package.
Verify that your motherboard or controller provides a free SATA 3.0Gb/s port and that the power supply has an available SATA power connector. The drive measures 5.78 inches in length, so confirm the drive cage or bay depth can accommodate it. This unit is sold new; the supplier notes that used examples of this model may show up to 25 bad sectors, but that does not apply to this stock.
Measured against everything we stock in 3.5-Inch Internal Desktop HDDs, at today’s prices. Recalculated every night.
New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Western Digital |
| Product line | WD Green |
| Model name | WD10EADS |
| Total capacity | 1 TB |
| Recommended use | Ideal for Servers |
| Performance | |
| Rotational speed | 7,200 RPM |
| Average seek time | 8.9 ms |
| Storage | |
| Cache memory | 32 MB |
| Ports & slots | |
| Interface type | SATA 3.0Gb/s |
| Size & build | |
| Form factor | 3.5 in (8.89 cm) |
| Maximum length | 5.78 in (14.7 cm) |
| Shipping weight | 0.60 kg |
| Package size | 146 × 102 × 25 mm |
The SATA 3.0Gb/s link caps the theoretical maximum at 3.0 gigabits per second, so sustained reads and writes from the 7200 RPM platters will not exceed that bandwidth.
It fits a standard 3.5-inch bay measuring up to 5.78 inches long, 4 inches wide and 1 inch high, using the usual bottom or side screw holes.
Connect the SATA data and power cables, secure the drive with four screws, then initialise and format the 1TB volume in the operating system before use.
More in 3.5-Inch Internal Desktop HDDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?