Seagate BarraCuda ST8000DM004 8TB 5400 RPM 256MB SATA 3.5" internal hard drive
- 8 TB
- SATA 6.0Gb/s
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
4 TB desktop hard drive with 7200 RPM, 256 MB cache and SATA 6.0 Gb/s interface for NAS arrays up to 24 bays
The WD Red Pro WD4003FFBX is a 4 TB 3.5-inch internal hard drive built for desktop and NAS use. It runs at 7200 RPM with a 256 MB cache and connects through a SATA 6.0 Gb/s interface. The CMR recording technology and bare-drive packaging suit system builders and integrators.
This drive is designed for enterprise NAS environments supporting 1 to 24 drive bays and a 300 TB yearly workload rate. NASware 3.0 firmware and 3D Active Balance Plus improve reliability in vibration-heavy chassis. Not suited for portable use, laptop upgrades, or systems that cannot accommodate a 3.5-inch SATA device.
The supplier rates maximum sustained throughput at 217 MB/s, a figure that helps confirm the drive can keep up with RAID rebuilds and streaming workloads. Combined with the 7200 RPM spindle speed and 256 MB cache, this throughput level is the key indicator for RAID and NAS performance planning.
Measured against everything we stock in 3.5-Inch Internal Desktop HDDs, at today’s prices. Recalculated every night.
New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | WD |
| Product line | Red Pro |
| Model name | WD4003FFBX |
| Total capacity | 4 TB |
| Recommended use | Enterprise NAS Hard Drives |
| Performance | |
| Rotational speed | 7,200 RPM |
| Storage | |
| Flash memory type | Hard Drives |
| Recording method | CMR |
| Cache memory | 256 MB |
| Ports & slots | |
| Interface type | SATA 6.0Gb/s |
| Size & build | |
| Form factor | 3.5 in (8.89 cm) |
| Max height | 26.1 mm |
| Maximum width | 101.6 mm |
| Maximum length | 147 mm |
| Shipping weight | 0.84 kg |
| Package size | 224 × 160 × 76 mm |
Yes — the drive connects via a SATA 6.0Gb/s interface and fits a standard 3.5-inch bay with maximum dimensions of 147.00mm length, 101.60mm width and 26.10mm height.
It is built for 1-24 bay NAS systems with NASware 3.0 technology and 3D Active Balance Plus, so it can operate in mixed-drive environments while maintaining its 300TB/year workload rating.
Check the drive’s reported cache size and run a sequential read/write benchmark; sustained speeds near 217 MB/s confirm the SATA 6.0Gb/s link and 7200 RPM CMR performance are functioning.
More in 3.5-Inch Internal Desktop HDDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?