Seagate BarraCuda ST8000DM004 8TB 5400 RPM 256MB SATA 3.5" internal hard drive
- 8 TB
- SATA 6.0Gb/s
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 5 TB 3.5-inch SATA drive built for 1 to 8-bay NAS systems with 5400 RPM and 64 MB cache
The WD50EFRX is a 5TB 3.5-inch internal hard drive built for network-attached storage enclosures that run continuously. It targets home and small-office users who need reliable bulk storage across one to eight drive bays.
Desktop-class drives lack the firmware and vibration controls required for 24x7 multi-drive operation. The jump is worth it when you move from a single-drive backup to a redundant array or when an existing NAS shows vibration-related errors.
Confirm your NAS accepts 3.5-inch drives with a 26.1mm height and provides SATA 6.0Gb/s ports. Check that the chassis can supply adequate cooling for continuous operation and that the drive cage fits the 147mm length.
Measured against everything we stock in 3.5-Inch Internal Desktop HDDs, at today’s prices. Recalculated every night.
New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | WD |
| Product line | Red |
| Model name | WD50EFRX |
| Total capacity | 5 TB |
| Recommended use | For NAS systems |
| Performance | |
| Rotational speed | 5,400 RPM |
| Storage | |
| Cache memory | 64 MB |
| Ports & slots | |
| Interface type | SATA 6.0Gb/s |
| Size & build | |
| Form factor | 3.5 in (8.89 cm) |
| Max height | 26.1 mm |
| Maximum width | 101.6 mm |
| Maximum length | 147 mm |
| Shipping weight | 0.72 kg |
| Package size | 150 × 102 × 25 mm |
Yes, the drive measures 147.00mm long, 101.6mm wide and 26.1mm high, matching the standard 3.5-inch dimensions used in 1 to 8 bay NAS enclosures.
Connect both the SATA data and power cables firmly, then initialise the disk in the NAS operating system before creating any volumes; skipping the initialisation step is the most common reason the full capacity does not appear.
Run a SMART short test monthly and a long test quarterly; the NASware 3.0 firmware logs vibration and temperature data that the NAS dashboard can alert on before a failure develops.
More in 3.5-Inch Internal Desktop HDDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?