Westward 10T920 pneumatic accessory M30x1.50 die

Westward M30x1.50 threading die

The Westward 10T920 is a round threading die cut from high-speed steel for right-hand metric threads. It produces M30 threads with a 1.50 mm pitch and is supplied in a new, uncoated bright finish. Machinists and maintenance technicians use it to create or repair external threads on rods, bolts or pipe ends in workshop and field environments.

Fits 2 1/2 inch die stock or holder

The die has an outside diameter of 2 1/2 inches and a thickness of 3/4 inch, so it mounts in standard adjustable die stocks or machine holders that accept this size. Its adjustable split design lets the user open or close the cutting edges slightly for fit calibration before locking the set screws. No additional power tooling is required; the die is turned by hand or with a suitable wrench on the stock.

Cuts M30x1.50 external threads

Each pass forms a 30 mm diameter thread with 1.50 mm pitch, suitable for standard metric coarse fasteners in steel and similar alloys. The high-speed steel teeth retain hardness at cutting temperatures generated by hand or low-speed machine threading. The die does not cut internal threads, left-hand threads or pitches other than 1.50 mm, so separate tooling is needed for those variants.