We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver SDS Plus hammer drill bit with 2-cutter carbide tip 12in overall length 10in drilling depth

Westward

Westward 22UV78 SDS Plus Hammer Drill Bit 5/8" x 12"L 2-Cutter

SKU CH-KEBP-694PH

Carbide-tipped SDS Plus bit drills 5/8 inch holes to 10 inches deep in masonry

  • 5/8 in diameter drills standard masonry anchors
  • 12 in overall length reaches deep holes
  • 10 in maximum drilling depth handles thick walls
  • 2-cutter carbide tip cuts cleanly in concrete
  • SDS Plus shank fits rotary hammer drills

Application & User Fit

The Westward 22UV78 is a 2-cutter SDS Plus hammer drill bit built for masonry work. It suits tradespeople and DIY users who need a straight shank bit for drilling into concrete, brick or block with a compatible rotary hammer. Buyers who require a different shank system or a larger diameter than 5/8 in should look elsewhere.

Capacity & Headroom

The bit has an overall length of 12 in and a maximum drilling depth of 10 in, giving usable reach for through-holes and anchor installations in standard wall thicknesses. The carbide tip handles typical masonry materials, while the 2-cutter geometry clears dust during normal use. Depths beyond 10 in exceed the designed capacity.

Thermals, Noise & Power Draw

The bright uncoated finish and carbide tip are designed to dissipate heat during hammer drilling cycles. Friction and vibration levels depend on the rotary hammer used and the hardness of the substrate. No specific thermal, acoustic or power-draw figures are provided for the accessory itself.

How it compares

Measured against everything we stock in Bits, Hole Saws & Accessory Kits, at today’s prices. Recalculated every night.

Price $17.99
Cheaper than about 68% of the 5,493 comparable items (median $27.99).

Specifications

Product
Brand nameWESTWARD

Questions about this item

Will the SDS Plus shank on this 5/8 inch bit fit the rotary hammer I already own?

Yes, the SDS Plus shank is the standard interface used by most rotary hammers sold today, so it will lock into your existing tool without an adapter.

How can I confirm the 22UV78 is drilling to the full 10 inch depth after I install it?

Mark the flute at 10 inches with tape or a marker; when the dust clears and the mark reaches the surface, you have reached the maximum drilling depth.

Does the 22UV78 come with a dust extraction attachment or do I need to buy one separately?

The box contains only the 12 inch carbide-tipped bit; dust extraction accessories are sold separately.

More in Bits, Hole Saws & Accessory Kits

Similar items