We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Westward straight flute hand tap bright finish 5/8 inch 11 UNC taper 4 flutes

Westward

Westward 2LXF3 Straight Flute Hand Tap 5/8"-11 Taper 4 Flutes UNC

SKU CH-P2KM-XKJ99

Cuts UNC threads in a 5/8"-11 hole with a taper lead and four straight flutes

  • Product typeHole, Drill, Bore & Wire Gauges
  • 5/8"-11 UNC thread cuts standard coarse threads
  • Taper chamfer starts threads easily in through-holes
  • Four straight flutes clear chips efficiently in hand use
  • Carbon steel construction handles general-purpose tapping jobs
  • Bright uncoated finish suits low-speed manual operations

Thread Size and Pitch

The Westward 2LXF3 is a straight flute hand tap with a 5/8"-11 UNC thread size. It is intended for mechanics and machinists cutting new internal threads or repairing damaged ones in through-holes. The taper design provides a gradual start for easier alignment in metal workpieces.

Taper Style vs Other Taps

This taper tap replaces a plug or bottoming tap when starting threads in a blind or through hole. The jump is worth it when the first pass must cut cleanly without wandering, especially in tougher alloys where a plug tap might skip. Its 4 flute design offers a balance between chip clearance and thread strength for general purpose use.

Installation and Common Issues

The tap is turned by hand with a suitable wrench, requiring steady pressure and cutting fluid to prevent binding. Misalignment during the first few turns usually ruins the thread pitch, so a guide or drill press alignment helps. Dull flutes or lack of lubrication often cause the tap to snap inside the hole.

How it compares

Measured against everything we stock in Utility & Specialty Hand Tools, at today’s prices. Recalculated every night.

Price $4.99
Cheaper than about 93% of the 2,474 comparable items (median $23.99).

Specifications

Product
Brand nameWestward
Product typeHole, Drill, Bore & Wire Gauges

Questions about this item

What size tap wrench or holder fits the 5/8"-11 straight flute tap?

The tap has a 5/8"-11 UNC thread size and 1 13/16 in thread length. Use a tap wrench or adjustable holder sized for 5/8 in diameter shanks to match the straight flute design.

How do I start the taper tap straight in a drilled hole?

Drill the correct 5/8"-11 UNC tap drill size, apply cutting fluid, and turn the taper lead slowly with steady pressure. The tapered chamfer guides the first threads, but misalignment from rushing the start ruins the thread.

When should I replace this carbon steel tap?

Replace it when the bright uncoated flutes show dull edges, chipping, or when threading 5/8"-11 UNC holes requires excessive force and produces rough threads. Carbon steel wears faster than high speed steel in repeated use.

More in Utility & Specialty Hand Tools

Similar items