Westward 3APF2 Air Drum Pump 3.7 gpm 345 psi 3:1
Air-operated drum pump delivers 3.7 gpm at up to 345 psi with a 3:1 pressure ratio
- Product typeDrain Components
- Delivers 3.7 gpm flow rate for fast fluid transfer
- Reaches 345 psi maximum pressure for demanding applications
- 3:1 pressure ratio multiplies inlet air pressure efficiently
- Operates at 81 dB noise level for quieter workshop use
- Handles fluids up to 130 SUS viscosity for versatile compatibility
High-pressure air drum pump
The Westward 3APF2 is an air-operated drum pump designed for fluid transfer from standard drums. It delivers a 3:1 pressure ratio to reach 345 psi output pressure at 3.7 gpm flow. The unit includes a bung adapter for direct drum mounting.
For thick-fluid transfer, not thin solvents
Suits workshops moving viscous liquids up to 130 SUS such as oils or lubricants. The 81 dB noise level and 61 gpm air consumption require a robust compressed-air supply. Buyers needing low-viscosity solvent transfer or quieter electric operation should look at alternative pump types.
3:1 pressure ratio defines output force
The fixed 3:1 ratio multiplies inlet air pressure to determine the 345 psi maximum discharge pressure. Verify your available air supply stays within the 115 psi limit to match this specification.
How it compares
Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.
- Price $688.99
- Pricier than about 91% of the 4,240 comparable items (median $31.99).
Specifications
| Product | |
|---|---|
| Brand name | Westward |
| Model name | 3APF2 |
| Product type | Drain Components |
Questions about this item
What does the 3.7 gpm flow rate mean when I am actually pumping fluid?
The pump can move up to 3.7 gallons of liquid per minute when supplied with adequate air pressure, so a standard drum will empty in a few minutes depending on viscosity and hose length.
How does the 115 psi maximum air pressure limit what the pump can do?
The 115 psi air supply ceiling caps the fluid outlet pressure at the rated 345 psi through the 3:1 ratio; exceeding 115 psi air input would over-pressurise the system.
What does the pump need to mount on a drum?
A bung adapter is included, allowing the pump to thread directly into the standard 2-inch opening of a typical drum.
More in Drain Stoppers, Strainers & Traps
Similar items
HAYWARD POOL PRODUCTS INC SV20075STE 120V AC CPVC Solenoid Valve Trap
- Drain Components
Dayton 4JMV7 Centrifugal Pump 1 hp 90 gpm 304 Stainless Steel
- Drain Components
Banjo RB300-150 3 inch MNPT x 1-1/2 inch FNPT Reducing Bushing Schedule 80 trap
HAYWARD POOL PRODUCTS INC SV20075STV 120V AC CPVC Solenoid Valve Trap
- Drain Components





