We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Aluminium flaring tool with sliding T-handle and six swivel cones for 3/16 to 5/8 inch tubing

Westward

Westward 3CYR7 Flaring Tool 3/16-5/8 in 6 Sizes

SKU CH-M0FF-DWKZ4

Creates single 45-degree flares on aluminum, brass and copper tubing from 3/16 to 5/8 inch with a swivel cone and sliding T-handle

  • Product typeAngle, Pitch & Slope Locators
  • Creates precise 45-degree single flares on six tube sizes
  • Swivel cone ensures even flare formation without tube damage
  • Sliding T-handle provides leverage for consistent pressure
  • Lightweight aluminum body resists corrosion during repeated use
  • Handles tube walls up to .065 in maximum thickness

Six Sizes for Common Tubing

The Westward 3CYR7 flaring tool creates single 45 degree flares on aluminum, brass and copper tubing. It covers six sizes from 3/16 in to 5/8 in, matching the most frequent automotive and refrigeration lines. Mechanics and HVAC technicians use it to form leak-free joints on-site.

Swivel Cone and Sliding Handle

A swivel cone centres itself on the tube end while the sliding T-handle supplies leverage, so the flare forms evenly without cracking the wall. The tool accepts walls up to .065 in thick; thicker tubing will not seat properly. Aluminium body keeps the kit light but requires a clean, square cut to avoid oval flares.

Consistent Flares Under Repeated Use

The hardened cone maintains its profile through many cycles, producing repeatable 45 degree angles without galling soft metals. Heat does not build up in the aluminium frame during extended sessions, so dimensional accuracy holds steady. The fixed size set limits the tool to the six listed diameters; larger or metric lines need a different kit.

How it compares

Measured against everything we stock in Utility & Specialty Hand Tools, at today’s prices. Recalculated every night.

Price $35.99
Pricier than about 64% of the 2,474 comparable items (median $23.99).

Specifications

Product
Brand nameWestward
Product typeAngle, Pitch & Slope Locators

Questions about this item

How do I verify the Westward 3CYR7 produces a correct 45-degree flare on 3/16 in tubing?

After setup, form a flare on a scrap piece of 3/16 in copper or aluminum tube and measure the angle with a protractor; it should read 45 degrees and the cone should seat evenly without cracks.

What tube sizes and accessories are included with the Westward 3CYR7 flaring tool?

The tool comes with six dies for 3/16, 1/4, 5/16, 3/8, 1/2 and 5/8 in tubing, a sliding T-handle and the swivel cone; no tubing, deburring tool or lubricant is supplied.

Which flare type should I select if I need single 45-degree flares on copper lines up to 0.065 in wall thickness?

Choose the Westward 3CYR7 as listed — it is designed specifically for single 45-degree flares on aluminum, brass and copper with a maximum wall thickness of 0.065 in.

More in Utility & Specialty Hand Tools

Similar items