Westward 52NZ23 90° Steel Zinc Plated Fitting PK10
Pack of ten zinc-plated steel 90° SAE-LT grease fittings rated to 6,000 psi
- 90° angle routes grease around tight corners
- Steel body with zinc plating resists corrosion
- SAE-LT 1/4 in.-28 threads fit standard ports
- Rated to 6,000 psi for high-pressure service
- Pack of 10 covers multiple lubrication points
90° Steel Grease Fittings
The Westward 52NZ23 pack contains ten zinc-plated steel fittings with a 90-degree angle for lubrication points that are difficult to reach with straight versions. They suit automotive and industrial maintenance where standard SAE-LT threads are required.
Zinc-plated steel construction
Each fitting uses steel with a zinc-plated finish to resist corrosion in workshop environments. The 1/4 In. -28 SAE-LT thread matches common grease gun couplers, and the 35/64 in overall length fits standard access holes without protrusion.
Rated for 6,000 psi service
The fittings meet SAE J-534-C and withstand a maximum pressure of 6,000 psi, making them suitable for high-pressure grease systems. They are not intended for hydraulic lines or fluid transfer applications that require different thread forms or pressure ratings.
How it compares
Measured against everything we stock in Pumps, Sprayers & Pump Accessories, at today’s prices. Recalculated every night.
- Price $1.99
- Cheaper than about 99% of the 962 comparable items (median $38.99).
Specifications
| Product | |
|---|---|
| Brand name | WESTWARD |
Questions about this item
What does the SAE-LT 1/4 in.-28 thread standard limit in practice?
The SAE-LT 1/4 in.-28 threads accept only mating ports cut to that exact pitch, so the fitting cannot be used on metric or NPT ports without an adapter.
What clearance does the 35/64 in. overall length and 90° angle require?
The 35/64 in. length plus the 90° bend needs at least that much straight reach plus room for the hex body to swing clear of adjacent surfaces.
How are these zinc-plated steel fittings installed, and what step is often missed?
Thread each fitting into a clean 1/4 in.-28 SAE-LT port to 6,000 psi rating, then torque to spec; the missed step is confirming the port threads are undamaged before installation.
More in Pumps, Sprayers & Pump Accessories
