Jet-Lube
Jet-Lube Copper Anti-Seize Compound 2.5 gal Pail -65°F 1800°F 10092
$243.99
0.00295323BTC
In stock
Westward 52NZ70 Grease Fitting 45° M10×1.00 PK10
Pack of ten 45-degree M10×1.00 metric grease fittings rated to 5,000 psi and meeting DIN 71412
- 45° angle eases access in tight spaces
- M10×1.00 mm metric thread fits compatible ports
- Steel construction with zinc-plated finish resists corrosion
- Rated to 5,000 psi for high-pressure lubrication
- Pack of 10 fittings meets DIN 71412 standard
45° M10×1.00 Grease Fitting Pack
This pack contains ten zinc-plated steel grease fittings with a 45-degree head angle and M10×1.00 mm metric threads. Each fitting measures 7/8 inch overall and is rated for 5,000 psi maximum pressure. The components meet DIN 71412 specifications for standard lubrication points.
Maintenance teams needing 45° metric fittings
Technicians servicing equipment with M10×1.00 ports and restricted access will find the angled head useful for reaching tight zerks. Shops requiring straight fittings, different thread pitches, or larger package quantities should look at other listings. The Proposition 65 notice applies to this product.
M10×1.00 thread size determines fit
The single specification that decides compatibility is the M10×1.00 mm metric thread. Verify the host component uses this exact thread before ordering. No other dimensions or standards are referenced in the data.
How it compares
Measured against everything we stock in Oils, Greases & Fluids, at today’s prices. Recalculated every night.
- Price $3.99
- Cheaper than about 96% of the 337 comparable items (median $22.99).
Specifications
| Product | |
|---|---|
| Brand name | WESTWARD |
Questions about this item
How do I install the M10×1.00 45-degree grease fitting and what step is often missed?
Thread the M10×1.00 fitting into the port by hand, then torque to spec with a wrench; the step often missed is cleaning the port threads first so the zinc-plated steel seats cleanly and seals at 5,000 psi.
What maintenance or replacement will these fittings need over time?
Inspect the ball check and zinc-plated finish each service interval; replace any fitting that shows corrosion, a stuck ball, or leakage past the 45-degree head.
What limit appears first during sustained high-pressure greasing?
The 5,000 psi maximum pressure rating is the first limit; exceeding it can unseat the ball check or deform the steel body on the M10×1.00 thread.
More in Oils, Greases & Fluids
