We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten zinc-plated steel grease fittings with 30-degree angled heads and 1/8 NPTF threads

Westward

Westward 52PA16 Grease Fitting 30 Deg Steel 1/8 NPTF PK10

SKU CH-3HSQ-4W795

Pack of ten zinc-plated steel grease fittings with a 30-degree head angle and 1/8 NPTF threads for high-pressure lubrication points

  • 30-degree angle eases access to tight lubrication points
  • Steel body with zinc-plated finish resists corrosion
  • 1/8-27 NPTF threads fit standard grease-gun couplers
  • Rated to 5,000 psi for high-pressure service
  • Pack of 10 fittings covers multiple maintenance jobs

Industrial Grease Fitting Pack

The Westward 52PA16 pack supplies ten steel grease fittings with a 30-degree head angle and 1/8-27 NPTF threads. They suit maintenance crews and machine operators who need reliable lubrication points on industrial equipment.

Zinc-Plated Steel Construction

Each fitting measures 1 7/32 inches overall and carries a 5,000 psi maximum pressure rating. The zinc-plated finish resists corrosion while the 30-degree angle eases access on confined bearings and tight chassis locations.

Verify Thread And Pressure Needs

Confirm that your equipment uses 1/8-27 NPTF threads before ordering. Ensure the 5,000 psi rating meets or exceeds your system pressure and that a 30-degree head clears surrounding components.

How it compares

Measured against everything we stock in Pumps, Sprayers & Pump Accessories, at today’s prices. Recalculated every night.

Price $25.99
Cheaper than about 61% of the 962 comparable items (median $38.99).

Specifications

Product
Brand nameWESTWARD

Questions about this item

What thread standard does the 1/8 in. NPTF fitting use, and what pressure does it handle?

The fitting uses a 1/8 in. -27 NPTF thread and is rated for a maximum pressure of 5,000 psi.

What are the overall length and head angle of this steel grease fitting?

The overall length is 1 7/32 in. and the head angle is 30 degrees.

How are these zinc-plated fittings installed, and what common mistake should be avoided?

Install by threading the 1/8 NPTF end into the port with a wrench on the hex; do not overtighten, which can crack the port or strip the tapered threads.

More in Pumps, Sprayers & Pump Accessories

Similar items