Wet Sounds AR-AMP 2CH car amplifier
A two-channel amplifier built for plug-and-play expansion of the AR-5 Ranger roof system, adding REV8 or ICON 8 tower speakers with adjustable gain from .2 to 5.0 V.
- Amplifier channels2
- Product typeAmplifier
- Plug-and-play expansion for AR-5 Ranger roof systems
- Add REV8 or ICON 8 tower speakers with included 8-pin harness
- 2-channel stable operation, bridgeable to 4 channels
- Adjustable bass boost up to 16 dB and crossover 40 Hz to 400 Hz
- Gain sensitivity range from 0.2 V to 5.0 V for flexible tuning
System Expansion
The Wet Sounds AR-AMP 2CH is a two-channel amplifier built to integrate directly with the AR-5 Ranger Roof Audio System. It targets owners of that specific roof system who want to add a pair of REV8 or ICON 8 tower speakers. The unit is constructed to withstand the elements and uses a plug-and-play harness for straightforward installation.
Power Configuration
The amplifier runs stable at two ohms per channel and can be bridged to four ohms without a VU meter. This headroom supports the additional speaker pair designated for the roof system. It runs out when the load drops below the rated two-ohm stability or when bridged into an impedance lower than four ohms.
Signal Tuning
The gain and sensitivity adjustment spans 0.2V to 5.0V, setting the input stage for the source signal. A variable crossover operates from 40Hz to 400Hz with high, low, and full pass options. Bass boost is adjustable up to 16 dB. All controls are accessed by removing the cover.
How it compares
Measured against everything we stock in Car Audio Amplifiers, at today’s prices. Recalculated every night.
- Price $378.99
- Pricier than about 71% of the 158 comparable items (median $225.49).
Specifications
| Product | |
|---|---|
| Product type | Amplifier |
| Audio & video | |
| Amplifier channels | 2 |
Questions about this item
Will the AR-AMP 2CH plug straight into the wiring of my existing Wet Sounds AR-5 Ranger roof system?
Yes, it is designed as a plug-and-play expansion for the AR-5 Ranger Crew roof system and includes an additional 8-pin wire harness for direct connection.
How can I confirm the amplifier is delivering clean output to my REV8 or ICON 8 tower speakers after installation?
Remove the cover to access the gain control and set sensitivity between 0.2V and 5.0V, then use the crossover switch to select Hi, Low or Full range while listening for distortion-free output.
What comes in the box and what extra parts are needed to add a pair of tower speakers?
The amplifier and an 8-pin wire harness are included; you must supply the REV8 or ICON 8 tower speakers, speaker wire and a suitable power and ground cable for the 2-channel amp.
More in Car Audio Amplifiers
Similar items
Wet Sounds Front Battery 4 Amplifier Power Kit car amplifier
- Amplifiers
NVX VAD27001 2700W RMS Class D Monoblock Car Amplifier with Bass Remote Marine Certified
- Equalizers





