Wet Sounds HTX-2 2-channel car amplifier
Class D two-channel amplifier delivering 150 watts RMS per channel at four ohms with variable crossovers and subsonic filter
- Amplifier channels2
- Product typeAmplifier
- Clean 150 W per channel at 4 Ω with under 1.0 % THD
- 600 W mono when bridged at 4 Ω for subwoofer duty
- Class D efficiency keeps the compact chassis cool under load
- Variable gain from .2 V to 6.0 V matches any source unit
- 12 dB per octave crossovers tune mids or subs from 50 Hz to 250 Hz
HTX-2 2-channel marine amplifier
The Wet Sounds HTX-2 is a Class D marine amplifier with two channels designed for extreme environments. It delivers 150 watts RMS per channel at 4 ohms and 300 watts RMS per channel at 2 ohms, both below 1.0% THD. Bridged mono operation provides 600 watts RMS at 4 ohms. Variable input sensitivity from .2V to 6.0V ensures compatibility with various source units.
Upgrade from lower-power Class AB units
Replacing a lower-output or less efficient amplifier with the HTX-2 adds clean headroom and reduces current draw thanks to Class D circuitry. The jump is worth it when speakers demand more continuous power than a factory or entry-level amp supplies, or when thermal protection and a compact chassis are required for tight marine installations. Frequency response extends from 20Hz to 20KHz at -3dB.
Boaters needing flexible crossover control
This amplifier suits owners who want adjustable low-pass and subsonic filters ranging from 50Hz to 250Hz at 12dB per octave for precise subwoofer or midrange tuning. It is not for systems requiring more than two channels, built-in DSP, or wireless connectivity. Buyers needing multi-zone control or integrated signal processing should look at a different product.
How it compares
Measured against everything we stock in Car Audio Amplifiers, at today’s prices. Recalculated every night.
- Price $212.99
- Typical for this category: the median of 158 items is $225.49.
Specifications
| Product | |
|---|---|
| Product type | Amplifier |
| Audio & video | |
| Amplifier channels | 2 |
Questions about this item
What mounting footprint does the HTX-2 need on a fibreglass bulkhead?
The compact Class D chassis fits in tight marine lockers; allow clearance for the top-mounted heat sink and the side-mounted power and speaker terminals.
Which gain-setting step do installers most often skip on this amplifier?
After wiring, play a 0 dB test tone and turn the input sensitivity control until the clip LED just flickers, matching the 0.2 V to 6.0 V source range.
How should the HTX-2 be serviced after a season of saltwater exposure?
Rinse the exterior with fresh water, blow dust from the cooling fins with low-pressure air, and verify the 12 dB per octave crossover pots have not corroded.
More in Car Audio Amplifiers
Similar items
Wet Sounds Front Battery 4 Amplifier Power Kit car amplifier
- Amplifiers
Kenwood X303-4 4-Channel Class D Car Amplifier 75W RMS
- Amplifier
- Delivers 600 W max…





