White Lightning W70100010 Construction Adhesive 9 oz Cartridge Applicator
A 9 oz cartridge of white acrylic construction adhesive that remains flexible, resists shrinking, and can be painted after a 10-minute working time
- 10-minute working time for precise placement
- Flexible, shrink-proof bond handles joint movement
- Waterproof acrylic base resists moisture damage
- Paintable finish blends with interior surfaces
- GreenGuard Gold certified for low VOC emissions
White Lightning W70100010 Construction Adhesive
White Lightning W70100010 Construction Adhesive is a 9 oz cartridge designed for interior bonding tasks. Its acrylic base provides a flexible, shrink-proof bond that remains waterproof after curing. The product carries GreenGuard Gold Certification and features low odour for indoor use.
Suited for interior trim and panel work.
This adhesive suits installers fixing trim, panels or mouldings inside buildings where a paintable, white finish is required. The 10 minute working time allows repositioning during fitting. Buyers needing exterior-grade adhesion or a larger container volume should look at alternative products.
Sustained interior performance with waterproof cure
Under sustained indoor conditions the cured bead stays flexible and resists shrinking, maintaining a waterproof seal. VOC content is 28.6 percent by weight, measured at 2 g/L, meeting GreenGuard Gold limits. California Proposition 65 warnings apply for cancer and reproductive harm.
How it compares
Measured against everything we stock in Caulking & Sealing Supplies, at today’s prices. Recalculated every night.
- Price $4.99
- Cheaper than about 93% of the 631 comparable items (median $16.99).
Specifications
| Product | |
|---|---|
| Brand name | WHITE LIGHTNING |
Questions about this item
What dispensing gun do I need for the 9 oz cartridge?
Use any standard caulk gun that accepts a 9 fl oz cartridge to apply this adhesive.
Can I apply this acrylic adhesive over previously cured solvent-based sealant?
Yes, the acrylic base bonds to cured sealants if the surface is clean, dry and free of loose material.
How do I confirm the 10 minute working time is accurate on site?
Apply a test bead; it should remain toolable for about 10 minutes before skinning over.
More in Caulking & Sealing Supplies
Similar items
Unique-Bargains Fluorine Rubber O-Rings 15mm OD 9mm ID 3mm Pack of 5
- Fluorine Rubber
Loctite 680 Retaining Compound 10ml .015 in Gap 1835205
- Sealing Compound
D.A.P. 70798-18032 Acrylic Latex Adhesive Caulk 10 oz Cartridge White
Vibra-TITE 73250 Flexible Gasket Maker 50 mL Purple
- Filler/Repair Compo…





