WUQ 2C53P Plus 3-in-1 Oscilloscope Multimeter Signal Generator 50MHz 250MS/s 4.3in Touchscreen 4000mAh
A 2-channel 50 MHz oscilloscope, 19999-count multimeter and 10 MHz signal generator in one 4.3-inch touchscreen unit with 4000 mAh battery
- Product typeTest Instrument & Gauge Parts
- 3-in-1 oscilloscope, multimeter and signal generator saves bench space
- 2-channel 50 MHz bandwidth with 250 MS/s capture rate reveals fast signals
- 3-inch IPS touchscreen 480×272 resolution enables direct waveform control
- 4000 mAh battery delivers 4 hours portable operation per charge
- 4½-digit 19999-count multimeter measures voltage, current, capacitance, resistance, diode, continuity and temperature
3-in-1 Portable Test Instrument
The WUQ 2C53P Plus combines a two-channel oscilloscope, a digital multimeter and a DDS signal generator in one handheld tablet. It targets technicians and hobbyists who need bench-level measurement, signal generation and waveform analysis in a single battery-powered unit for field or bench work.
Build Integration and Power
The 4.3 inch IPS touchscreen with 480 by 272 resolution replaces separate displays and keyboards, freeing bench space and reducing cable clutter. A 4000 mAh battery delivers four hours of continuous operation, so the instrument can move between a vehicle, a workbench and a test point without mains power.
Bundled Accessories and Software Impact
The included carrying case protects the tablet, probes and leads during transport and keeps all three functions organised for rapid deployment. On-board analysis tools such as afterglow, FFT spectrum analysis, cursor measurement and Lissajous display let users inspect signal frequency content and timing directly on the device.
How it compares
Measured against everything we stock in Meters, Testers & Measuring Tools, at today’s prices. Recalculated every night.
- Price $185.99
- Pricier than about 75% of the 3,030 comparable items (median $54.99).
Specifications
| Product | |
|---|---|
| Product type | Test Instrument & Gauge Parts |
Questions about this item
How long can the 4000mAh battery run the 4.3in touchscreen before a recharge?
The built-in 4000mAh battery provides about 4 hours of continuous use on a full charge.
Does the FPGA plus MCU architecture keep the 50MHz scope cool during all-day capture?
The FPGA+MCU+ADC hardware design protects the unit from overheating during sustained operation.
What voltage range must my probes handle for the multimeter's 19999-count mode?
The multimeter measures up to ±400V, so probes rated for at least that voltage are required.
More in Meters, Testers & Measuring Tools
Similar items
VXDIAG VCX SE Nissan OBD2 Diagnostic Tool CONSULT V226 WiFi
- ?5.75 × 4.72 × 2.68…
- Code Scanners & Acc…
Starrett 3809MAC Horizontal Dial Test Indicator, 1.25 in Yellow Dial
Pomona Electronics 5674C Deluxe Electronic DMM Test Lead Kit CAT II 300V CAT III 1000V
- Electronic





