WUQ TFI-40 Optical Fiber Identifier with VFL 800nm-1700nm measurement tool
Identifies live fibre traffic and measures power from 800 to 1700 nm with a built-in 10 mW VFL and LED light for dark environments
- Product typeTest Equipment
- Identifies live fibre traffic without service interruption using multi-size chucks for .25, .9, 2.0, 3.0 mm fibres
- Measures optical power from -40 dBm to 10 dBm with dual 1 mm InGaAs detectors for accurate core readings
- Built-in 10 mW VFL at 800-1700 nm locates breaks and bends up to 10 km via 2.5 mm universal connector
- Directional LED indicators and audible buzzer give immediate signal-direction and tone identification during maintenance
- Integrated LED work light enables operation in dark environments without carrying a separate torch
All-in-One Chuck Design
The WUQ TFI-40 is a handheld fiber identifier that integrates a visual fault locator and LED work light. It accepts 0.25, .9, 2.0 and 3.0 mm fibers without swapping chucks. The detector uses two 1 mm InGaAs sensors covering 800 to 1700 nm.
Technicians Needing Live Traffic Checks
Suited for field engineers who must identify dark or live fibers, check core power direction and locate breaks up to 10 km using the 10 mW VFL. Buyers who need a lab-grade power meter with absolute accuracy or a unit that terminates connectors should look elsewhere.
-40 to 10 dBm Sensitivity Range
The detector sensitivity spans -40 dBm to 10 dBm, which determines the weakest and strongest signals the tool can reliably read. Match this window to the expected link budget before purchasing.
How it compares
Measured against everything we stock in Meters, Testers & Measuring Tools, at today’s prices. Recalculated every night.
- Price $106.99
- Pricier than about 65% of the 3,030 comparable items (median $54.99).
Specifications
| Product | |
|---|---|
| Product type | Test Equipment |
Questions about this item
How long does the battery last when I run the VFL and LED all day?
The unit runs on battery power and shows a low-battery indicator when charge drops, so you can swap cells before the VFL or LED cut out during a full day of testing.
How much heat or noise does the TFI-40 produce during continuous use?
It has no fan or moving parts, so operation is silent and the housing stays cool even while the 10 mW VFL and LED are running for extended periods.
What fiber sizes can I test without buying extra adapters?
The all-in-one chuck accepts 0.25 mm, 0.9 mm, 2.0 mm and 3.0 mm fibers directly, so no separate adapters are needed for those common diameters.
More in Meters, Testers & Measuring Tools
Similar items
Ashcroft 451279 Process Pressure Gauge 0 to 30 psi 4 1/2 in Dial 1/2 in NPT
- Electronic
WUQ KT002 USB Tester Type-C Micro USB QC 2.0 QC 3.0 PD
- Test Instrument & G…





