We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten small rectangular UV ink dampers with 4x3mm fittings

YINGHUA

YINGHUA 10PCS XP600 UV Ink Damper JV33 JV5 CJV150 DX5 (4x3mm)

SKU CH-7VQP-RP4NW

Pack of 10 dampers filters ink for DX5 print heads on JV33, JV5 and CJV150 printers

  • Product categoryReplacement Parts
  • Pack of 10 dampers keeps production running
  • PP construction resists corrosion from UV and solvent inks
  • Large filter area maintains steady ink flow to print head
  • Compatible with Mimaki JV33, JV5 and CJV150 models
  • Fits Epson XP600, TX800 and DX5 print heads

Compatible Printer Models

This 10-piece pack of XP600 UV ink dampers fits Mimaki JV33, JV5 and CJV150 wide-format printers. It also matches Epson XP600 and TX800 printheads using the DX5 platform. The parts are sold new and ready for solvent or UV-curing ink systems.

Critical Fit Specification

The damper inlet and outlet ports measure 4 by 3 millimetres, which is the single dimension that decides whether the part will seat on your printhead manifold. If your machine uses a different port spacing the dampers will not seal and ink will leak past the filter.

Installation Notes

Each damper pushes onto the printhead nipples by hand; no tools are required beyond a clean lint-free cloth. The most common error is re-using the old O-rings, which harden over time and cause air bubbles that starve the nozzles. Replace the seals every time you swap dampers.

How it compares

Measured against everything we stock in Print & Scan Accessories, at today’s prices. Recalculated every night.

Price $59.99
Cheaper than about 66% of the 5,855 comparable items (median $91.99).

Specifications

Product
Product categoryReplacement Parts

Questions about this item

How does a pack of 10 dampers translate into daily printing uptime?

Each damper filters ink before it reaches the DX5 head, so ten units let you rotate replacements without stopping a JV33, JV5 or CJV150 production run.

What connection standard do these 4x3 mm fittings follow, and what flow rate does it limit?

The 4x3 mm barbed ports match the DX5 feed tubes used on Mimaki JV33, JV5 and CJV150 printers, capping flow to what the original printhead channels accept.

What physical clearance is needed to seat the damper on a DX5 carriage?

The compact PP body fits the standard DX5 mounting footprint on JV33, JV5 and CJV150 carriages, requiring only the existing screw holes and tube routing space.

More in Print & Scan Accessories

Similar items