YINGHUA 9mm SATA HDD Caddy Aluminium Enclosure Bay
A 9 mm aluminium caddy converts a notebook optical-drive bay into a second SATA drive slot and weighs 70 g
- Adds a second SATA drive to a 9.0 mm optical bay
- Aero-grade magnesium aluminium alloy with anodised finish
- Three positioning holes match the original drive mount
- Taiwanese SATA interface rated below 1/1000 defect rate
- Four side-lock screws secure the drive in 3D alignment
Universal 9mm SATA HDD Caddy
The YINGHUA caddy converts a 9.0 mm optical drive bay into a second SATA storage slot for notebooks, all-in-one PCs and servers. It accepts any 2.5-inch drive with a SATA interface and secures it with four side-lock screws. The aeronautical aluminium shell adds rigidity while keeping weight to approximately 70g.
Suits single-drive laptops needing extra capacity
Builders who want to add a secondary hard drive or SSD without losing the optical drive will find this a direct fit. Systems that use a thinner or thicker bay, or that require a different mounting pattern, cannot use this enclosure. Buyers who need tool-free drive swaps or hot-swap capability should look elsewhere.
9.0 mm SATA bay thickness
The single specification that decides compatibility is the 9.0 mm bay height combined with a SATA interface. If the host device has a 9.0 mm optical drive slot and a SATA connection, the caddy will install using the three positioning holes. Any other bay height or interface makes the part unsuitable.
How it compares
Measured against everything we stock in Tech Gadgets & Accessories, at today’s prices. Recalculated every night.
- Price $7.99
- Cheaper than about 94% of the 5,998 comparable items (median $24.99).
Specifications
No published specifications for this item yet.
Questions about this item
Does my laptop need a 9.0 mm SATA optical-drive bay to fit this 130*128*9 mm caddy?
Yes, it replaces a 9.0 mm thick SATA optical drive in notebooks, all-in-ones or servers.
Will a 7 mm SATA SSD sit securely in the four side-lock screws and three positioning holes?
The tray uses four side-lock screws and 3D positioning; a 7 mm drive may need a spacer to reach the 9 mm height.
How do I confirm the caddy's SATA pass-through is working after installation?
The new drive should appear in BIOS and the operating system as a standard SATA storage device.
More in Tech Gadgets & Accessories
Similar items
Unique-Bargains AA Battery Case 8-Slot DC Connector 15cm Wire 4-Pack
- Battery Converter
Unique-Bargains CR2032 Horizontal Battery Holder Brown 10 Pcs
- Battery Converter
Unique-Bargains 16ft Cat5e Ethernet RJ45 DC Power Cable 5.5mm
- Gadgets





