YINGHUA B03 RFID Access Control Keypad Door Lock
A standalone 125KHz RFID keypad supporting 1000 users with card, PIN or combined entry for doors
- Main functionEntrance
- Product typeChain Guard
- Main materialMetal
- Standalone operation needs no computer connection
- 1000 users supported with cards or codes
- Reads 125 kHz and 13.56 MHz credentials
- Metal housing works from -10 to 60 °C
- Built-in doorbell button adds convenience
Standalone RFID Keypad for Doors
The YINGHUA B03 is a standalone access-control keypad that reads 125KHz EM cards and accepts PIN codes. It supports up to 1000 users and works without a computer connection. The unit suits homes, offices, hotels and apartment blocks where a simple, self-contained entry system is required.
Surface Mount with 12 V DC Wiring
The reader measures 120mm by 78mm by 22mm and mounts on a flat surface. Installation requires a DC12 V power supply and an electric lock or strike wired to the relay terminals. Common issues include reversing the 12 V polarity, exceeding the 0-10cm read range by spacing the reader too far from the card, or forgetting to enrol the master card before adding users.
Stable Operation from -10 to +60 °C
The keypad draws its rated working current continuously while powered and maintains the specified read distance during prolonged use. The plastic housing tolerates 20%-90% relative humidity without condensation. No active cooling is present, so the unit relies on ambient airflow; sustained heavy traffic does not change its response speed or card recognition reliability.
How it compares
Measured against everything we stock in Door Lock Sets & Deadbolts, at today’s prices. Recalculated every night.
- Price $164.99
- Pricier than about 79% of the 2,145 comparable items (median $55.99).
Specifications
| Product | |
|---|---|
| Product type | Chain Guard |
| Size & build | |
| Main material | Metal |
| More details | |
| Main function | Entrance |
Questions about this item
How do I verify the keypad is working after wiring it to 12 V DC?
Apply power and press the door-bell button; the unit should chime. Then present an enrolled 125KHz card or enter a stored password — the relay will click and the door will release if the credential is accepted.
What comes in the box and what must I source separately?
The package contains the B03 keypad reader only. You must supply a 12 V DC power supply, an electric strike or magnetic lock, exit button, and 125KHz EM cards or key-fobs for the 1000-user capacity.
Should I choose the 125KHz or 13.56 MHz version for my existing cards?
Select 125KHz if your current credentials are EM-format proximity cards; choose 13.56 MHz only if you use MIFARE-type credentials, because the two frequencies are not interchangeable.
More in Door Lock Sets & Deadbolts
Similar items
Marks USA 2750B/26D Satin Chrome Right Hand Mortise Lever Entry Door Lock
- Satin Chrome
- Box
Accuform Door Lock Steering Wheel Cover Do Not Operate 20 HAWA KDD722
Master Lock Dielectric Lockout Padlock Keyed Alike Yellow 1/4In PK12
- Dielectric
Unique-Bargains Push Lock for Sliding Glass Cabinet Door 5mm Keyed Alike 2Pcs
- Door Knob Locksets
Medeco 10-0200-605-00 Bright Brass 1-1/8" 6 Pin Mortise Cylinder Yale Cam 00 Keyway
- Keyed Different
- Bright Brass





