YINGHUA PIC16F15375-IPT TQFP44 semiconductor
Microcontroller in a 44-pin TQFP package for embedded control applications
- Product typeICs Semicoductors
- PIC16F15375 microcontroller in 44-pin TQFP package
- New condition semiconductor ready for integration
- IC type suited for embedded control applications
- Manufacturer part number 15375 identifies the device
- First listed by manufacturer in February 2025
Microcontroller for embedded control
The PIC16F15375-IPT is an 8-bit microcontroller in a 44-pin TQFP package. It suits engineers building cost-sensitive embedded systems that need core-independent peripherals. The device integrates configurable logic and analogue blocks for real-time control tasks. Hobbyists and OEM developers can use it for automation, sensor interfaces or simple state machines.
Low-power operation in normal use
The architecture targets low active and sleep currents for battery-powered or energy-harvesting designs. Internal oscillators reduce external component count and board-level power draw. Peripheral modules can run while the CPU sleeps, cutting average consumption. Thermal load stays minimal in typical always-on applications.
Development ecosystem accelerates design
MPLAB X IDE and XC8 compiler provide free code development and debugging support. Curiosity Nano and MPLAB PICkit 5 hardware programmers enable in-circuit programming of the TQFP44 device. Microchip Code Configurator generates peripheral initialisation code from a graphical interface. Application notes and reference designs reduce time to first prototype.
How it compares
Measured against everything we stock in Encoders & Semiconductor Parts, at today’s prices. Recalculated every night.
- Price $27.99
- Cheaper than about 59% of the 1,027 comparable items (median $34.99).
Specifications
| Product | |
|---|---|
| Product type | ICs Semicoductors |
Questions about this item
How do I solder the PIC16F15375-IPT onto a PCB with its 44-pin TQFP footprint?
Align the 44 leads to the matching pads, apply flux, then reflow or hand-solder each pin; the step most people miss is inspecting for bridges under the fine-pitch leads with magnification before powering the board.
Will the internal flash or EEPROM of the PIC16F15375-IPT wear out and need replacement?
The on-chip flash is rated for many erase-write cycles; under normal firmware updates it lasts the product lifetime, so the IC itself is not a replaceable maintenance item.
What thermal limit appears first when the PIC16F15375-IPT runs continuous code at full speed?
The junction temperature rises until the silicon hits its maximum rated operating temperature, at which point the device must be cooled or clocked lower to avoid shutdown.
More in Encoders & Semiconductor Parts
Similar items
YINGHUA XC7A50T-2CSG324I FPGA Field Programmable Array CSBGA-324 semiconductor
- ICs Semicoductors
YINGHUA EP3C25Q240C8N FPGA PQFP-240 semiconductor
- ICs Semicoductors





