We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Flat 14-pin print head cable, 55 cm length

YINGHUA

YINGHUA Print Head Cable 14 Pins 55CM for I3200 WF4720 WF4730 WF4734 WF4740 WF4838 EC4030

SKU CH-N18E-8PK8Z

A 14-pin, 55 cm replacement cable connecting the printhead on compatible Epson I3200, WorkForce and EC series printers

  • Product categoryPrinthead
  • Compatible with I3200 and multiple WF series printers
  • 14-pin connector ensures secure printhead connection
  • 55 cm length fits standard carriage travel
  • New condition guarantees reliable signal integrity

Compatible Print Head Cable for Multiple Models

This 14-pin cable connects the print head on supported YINGHUA and Forepson printers including the I3200, WF4720, WF4730, WF4734, WF4740, WF4838 and EC4030. It is a direct replacement part for maintenance or repair work on those specific machines. Buyers needing a different pin count or a longer reach cannot use this item.

Passive Signal Cable with No Active Cooling

The cable carries low-voltage signals between the carriage and print head, so it generates no heat and requires no fan or external power. Normal operation is completely silent and adds negligible load to the printer's power supply. There are no thermal limits or noise considerations for this component.

How it compares

Measured against everything we stock in Print & Scan Accessories, at today’s prices. Recalculated every night.

Price $35.99
Cheaper than about 83% of the 5,855 comparable items (median $91.99).

Specifications

Product
Product categoryPrinthead

Questions about this item

How do I install the 14-pin print head cable on my WF-4740 without damaging the connector?

Power off the printer, open the carriage cover, align the 14-pin plug with the printhead socket, press straight in until the latch clicks, then route the 55 cm length along the existing cable channel so it cannot snag on moving parts.

When should I expect to replace the 14-pin cable on an I3200-based printer?

Replace the cable if you see broken pins, cracked insulation, or intermittent nozzle failures that persist after printhead cleaning; the 55 cm flex section typically lasts through several printhead swaps unless it is sharply bent or contaminated with ink.

More in Print & Scan Accessories

Similar items