We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Flat ribbon cable with 16 pins, 20 cm long, light grey insulation

YINGHUA

YINGHUA Print Head Cable 16 Pins 20CM

SKU CH-0QS0-6BBQ2

Connects print heads in compatible Epson WorkForce and EcoTank printers with a 16-pin, 20 cm cable

  • Product categoryPrinthead
  • Compatible with multiple Forepson printers including WF-C529R and WF-8093
  • 16-pin connector ensures secure printhead data transmission
  • 20 cm length allows flexible routing inside the printer chassis
  • New condition guarantees reliable performance from first installation

Replacement cable for Epson WorkForce printers

This 16-pin printhead cable connects the printhead to the mainboard on compatible Epson WorkForce models. It suits WF-C529R, WF-5113, WF-6090, WF-6093, WF-8010DW, WF-8090, WF-8093, WF-8510DWF and ET-8700 printers. Technicians and owners use it to restore printing after a cable failure. The 20 cm length matches the original routing inside these machines.

Passive component with no thermal or power profile

The cable carries low-voltage signals and draws no measurable power of its own. It produces no heat and no audible noise during printer operation. Thermals, acoustics and power draw are determined entirely by the printer itself. This part adds no thermal load and requires no cooling consideration.

How it compares

Measured against everything we stock in Print & Scan Accessories, at today’s prices. Recalculated every night.

Price $31.99
Cheaper than about 87% of the 5,855 comparable items (median $91.99).

Specifications

Product
Product categoryPrinthead

Questions about this item

How do I install the 16-pin cable on a WF-8090 and avoid pin misalignment?

Power off the printer, open the carriage, align the 16-pin connector key with the printhead socket, press straight in until the latch clicks, then close the carriage and power on.

When should I replace the 20 cm cable on a WF-6093?

Replace it if print quality shows missing nozzles after cleaning, if the connector pins are bent or corroded, or if the cable insulation is cracked near the flex point.

More in Print & Scan Accessories

Similar items