YINGHUA RFID Access Control 125KHZ Touch Keypad Door Lock flat Golden
A waterproof 125KHz RFID keypad door lock with metal case, backlight, 8000 card capacity and standalone programming
- Main functionEntrance
- Product typeChain Guard
- Main materialMetal
- Waterproof touch panel suits outdoor installation
- Backlit metal keypad allows entry in darkness
- 8000 card capacity supports large organisations
- Standalone operation needs no computer link
- WG26 and WG34 interfaces connect extra readers
Standalone RFID Door Lock
The YINGHUA unit operates as a self-contained access controller that stores up to 8000 EM-compatible cards and one master password. It reads credentials at 125KHz from 5-10CM without requiring a computer connection. A waterproof metal case with backlit touch keys and a built-in doorbell button suits outdoor entrance installations.
Sustained Operation on 12VDC
Powered by a 12VDC supply drawing 50mA at rest, the controller drives its relay at 2A to release electric locks repeatedly. The imported double-point relay and WG26/34 interfaces maintain consistent signal output during continuous daily cycles. No active cooling is described, so the metal shell passively dissipates heat during extended duty.
8000-Card Capacity Decides Fit
The single specification that determines suitability is the 8000-user memory limit. Sites needing more credentials must choose a different controller. The system also supports only one global password alongside card or card-plus-password modes, so multi-password policies are not possible.
How it compares
Measured against everything we stock in Door Lock Sets & Deadbolts, at today’s prices. Recalculated every night.
- Price $551.99
- Pricier than about 92% of the 2,145 comparable items (median $55.99).
Specifications
| Product | |
|---|---|
| Product type | Chain Guard |
| Size & build | |
| Main material | Metal |
| More details | |
| Main function | Entrance |
Questions about this item
How much power does the 12V DC supply draw when the lock is idle all day?
The unit draws 50mA quiescent current at 12VDC while waiting for a card or code.
What external components must already be on site for the lock to operate?
A 12VDC power source, an electric strike or maglock wired to the relay output, and an exit button for the release input are required.
Can the WG26 interface link this unit to an older controller that only speaks WG26?
Yes, the built-in WG26 interface allows direct connection to legacy controllers using the same 26-bit format.
More in Door Lock Sets & Deadbolts
Similar items
YINGHUA Narrow Door Electric Bolt Mortise Lock DC 12V Black NO
- Entrance
- Chain Guard
Deltana Enterprises Grade 1 Commercial Entry Lock Clarendon Brushed Chrome
YINGHUA BC40 RFID Access Control Door Lock Fat Silver
- Entrance
- Chain Guard
Master Lock Lockout Padlock Keyed Alike Orange 1-13/16 in Pack of 3
- Safety
YINGHUA RFID Access Control Waterproof 125KHZ Touch Keypad Door Lock Light Green
- Entrance
- Chain Guard





