YINGHUA RFID/EM Keypad Access Control Door Lock 125kHz 4000user
A 125 kHz RFID and keypad door controller supporting up to 4000 users with card, PIN or combined entry
- Main functionEntrance
- Product typeChain Guard
- Main materialMetal
- Holds up to 4000 users for large-scale access
- Reads cards from 5 to 15 mm away
- Works offline with power-off data protection
- Supports card, PIN or card-plus-PIN entry
- Runs on 12 V DC drawing only 0.1 A
Standalone 4000-user Access Keypad
This RFID/EM keypad provides offline door control for up to 4000 users. It operates on a DC 12 V supply drawing 0.1 A when the lock releases. The unit accepts EM, ID and IC cards at 125 kHz and 13.56 MHz frequencies. Master cards, PIN codes or combined card-plus-PIN entry are all supported.
Continuous Operation on 12 V Supply
The controller is designed for permanent installation and retains all user data during power loss. With an inductive read range of 5 to 15 mm, credentials are read quickly at the door. Current draw remains low at 0.1 A only during the unlock pulse, so the 12 V source is not heavily loaded. No network connection is required for daily operation.
Metal Housing With Wired or Wireless Bell Link
The metal enclosure measures 120 by 78 by 22 mm and weighs 0.22 kg. Mounting screws are supplied for direct surface fitting. A door-bell interface can be wired or configured wirelessly according to the installer's choice. Ten RFID key tabs and an English manual complete the package for immediate setup.
How it compares
Measured against everything we stock in Door Lock Sets & Deadbolts, at today’s prices. Recalculated every night.
- Price $297.99
- Pricier than about 90% of the 2,145 comparable items (median $55.99).
Specifications
| Product | |
|---|---|
| Product type | Chain Guard |
| Size & build | |
| Main material | Metal |
| More details | |
| Main function | Entrance |
Questions about this item
How much power does the 12 V DC supply need to deliver for the lock to run all day?
The unit draws 0.1 A at 12 V DC, so the supply must provide at least that current continuously.
What extra hardware must I already have for the keypad to open a door?
You need a 12 V DC power source and an electric strike or magnetic lock wired to the relay output.
Will the 125 kHz reader work with the EM cards I already use on an older panel?
Yes, the reader accepts EM cards at 125 kHz alongside ID and IC types at 13.56 MHz.
More in Door Lock Sets & Deadbolts
Similar items
Mul-T-Lock HDC-26 Satin Chrome Hercular Double Cylinder Captive Key Deadbolt
- Heavy Duty
- Key Control
Deltana Enterprises Grade 1 Commercial Entry Lock Clarendon Brushed Chrome
Yale Accentra AU5408LN 626 Classroom door lock
- Door Hardware & Com…
- 5400LN Augusta
Master Lock Lockout Padlock Keyed Alike Orange 1-13/16 in Pack of 3
- Safety
YINGHUA 12V 5A High End Supplier Adapter Covertor 100~260V Door Lock Power Supply
- Entrance
- Chain Guard





