YINGHUA USB82514AMR VQFN36 semiconductor
A USB interface IC in a 36-pin VQFN package for semiconductor applications
- Product typeICs Semicoductors
- USB82514AMR IC enables USB connectivity in compact designs
- VQFN36 package fits dense PCB layouts with 36 pins
- New condition ensures reliable performance from first power-up
- Semiconductor component suits custom electronic assemblies
- Manufacturer listed June 2026 for current production status
USB82514AMR IC for engineers
The YINGHUA USB82514AMR is a semiconductor component supplied in a VQFN36 package. It is intended for hardware engineers and PCB designers integrating USB functionality into custom circuits. The part is listed as new and was first catalogued by the manufacturer in 2026.
Not for non‑technical buyers
This device suits professionals who perform their own board‑level assembly and validation. It does not suit hobbyists without surface‑mount reflow equipment, nor buyers expecting a finished peripheral or a plug‑and‑play module. No firmware or driver package is included with the bare component.
Fits a custom PCB build
The VQFN36 footprint requires a matching land pattern and a controlled reflow profile during assembly. Surrounding circuitry must provide the necessary power rails, clock source and USB connector interface. Using this IC frees the designer from relying on larger bridge chips and reduces board area for space‑constrained applications.
How it compares
Measured against everything we stock in Encoders & Semiconductor Parts, at today’s prices. Recalculated every night.
- Price $26.99
- Cheaper than about 60% of the 1,027 comparable items (median $34.99).
Specifications
| Product | |
|---|---|
| Product type | ICs Semicoductors |
Questions about this item
What PCB footprint is required for the VQFN36 package?
The VQFN36 package needs a 36-pad land pattern with a centre thermal pad matching the 36-lead outline.
Can the USB82514AMR share a USB bus with legacy USB 2.0 hubs?
Yes, the IC is a USB device so it will enumerate on any standard USB host alongside older hubs.
How do I verify the USB82514AMR is active after soldering?
Check that the host enumerates a new USB device with VID/PID 82514 and that the data lines show valid USB signalling.
More in Encoders & Semiconductor Parts
Similar items
YINGHUA XC7A50T-2CSG324I FPGA Field Programmable Array CSBGA-324 semiconductor
- ICs Semicoductors
YINGHUA EP3C25Q240C8N FPGA PQFP-240 semiconductor
- ICs Semicoductors





