We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Clear UV ink tube set, six parallel lines, seven metres long

YINGHUA

YINGHUA UV ink tube 6 lines 7 m Clear 4x3 mm

SKU CH-YG6Y-GSPDD

Six-line clear UV ink tube, 7 m length, 4×3 mm bore, compatible with XP600, TX800, DX4, DX5 and DX7 print heads

  • Product categoryReplacement Parts
  • 6 lines feed multiple print heads simultaneously
  • 7 m length suits large-format UV printers
  • Clear 4×3 mm tubing fits DX4 DX5 DX7 heads
  • Compatible with Epson XP600 TX800 and Mimaki Mutoh Xuli Galaxy

UV ink tube for wide-format printers

This replacement supply line ships as a 7-metre clear hose with a 4 by 3 millimetre cross-section. It carries six separate channels so a single run feeds all colour paths to the print head. The tubing is built for UV-curable inks and fits Epson XP600, TX800, DX4, DX5 and DX7 heads as well as Mimaki, Mutoh, Xuli and Galaxy wide-format machines.

Thermals noise and power draw

The hose itself is a passive fluid conduit so it generates no heat, emits no noise and draws no electrical power during operation. Ink temperature is managed by the printer’s own heating system rather than the supply line. Routing the tube away from hot components prevents unwanted ink viscosity changes. Installers should avoid sharp bends that could restrict flow and cause pressure spikes in the delivery system.

How it compares

Measured against everything we stock in Print & Scan Accessories, at today’s prices. Recalculated every night.

Price $76.99
Cheaper than about 57% of the 5,855 comparable items (median $91.99).

Specifications

Product
Product categoryReplacement Parts

Questions about this item

How do I route the six clear 4×3 mm lines from the 7 m coil to an XP600 print head?

Unroll each line, cut to the exact run needed, then push the tube ends onto the head barbs until they seat fully; the step most people skip is verifying every connection for leaks before priming.

When should the clear 4×3 mm UV ink tubes be replaced on a DX7 printer?

Replace the tubing when it turns yellow, stiffens, or shows micro-cracks — typically after extended UV exposure or if ink flow becomes inconsistent.

More in Print & Scan Accessories

Similar items