We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White rectangular logic analyser with 16 probe leads and USB cable

Zeroplus

Zeroplus LAP-C 16128 Logic Analyzer 16-CH 136+ protocols measurement

SKU CH-XZ5W-FRWNC

16-channel logic analyzer with 128 Kbit memory per channel, 200 MHz sampling and 136-plus protocol decoders

  • Screen diagonalRAM Sizes: 256K
  • Interface typeUSB
  • Equipment typeSignal Analysis
  • Effective rangeWorking Range: -6 V to +6 V
  • Bandwidth rating75 MHz
  • Sampling rate200 MHz
  • 16 channels capture parallel buses in one session
  • 200 MHz sampling resolves fast edges with 5 ns resolution
  • 128 Kbit depth per channel stores long traces for offline review
  • 136 plus free protocols decode CAN I2C UART without extra licences
  • 75 MHz bandwidth covers common embedded clock rates

16-Channel Logic Analyzer

The Zeroplus LAP-C 16128 is a new test and measurement instrument with 16 channels and 128Kbits memory depth per channel. It targets engineers, educators and developers who need to capture and decode digital signals in consumer electronics and similar applications.

Upgrade from Fewer Channels

Moving to 16 channels lets you monitor wider buses or multiple serial lines simultaneously, while the 136+ free protocols including CAN, I2C and UART remove the need for separate decoders. The jump is worth it when a 4-channel or 8-channel tool forces you to re-probe the same board repeatedly.

Sustained Capture Behaviour

Total memory reaches 4Mbits and compression can extend this to 32Mbits, so long acquisitions stay intact without gaps. Internal clock runs from 100Hz to 100MHz in timing mode and external clock accepts up to 100MHz in state mode, keeping sample fidelity steady during extended runs.

How it compares

Measured against everything we stock in Test Equipment & Meters, at today’s prices. Recalculated every night.

Price $329.99
Pricier than about 83% of the 202 comparable items (median $148.99).

Specifications

Product
Brand nameZeroplus Tech
Model nameZeroplus LAP-C Series Logic Analyzer
Part numberFM00000166
Product typeTest & Measurement Products
Product colorWhite
Performance
Effective rangeWorking Range: -6 V to +6 V
Bandwidth rating75 MHz
Measurement accuracy± 0.1 V
Working frequency128 Hz
Storage
Data storageYes
Display
Screen diagonalRAM Sizes: 256K
Display formatWaveforms / Data / Packet Lists
Audio & video
Scope channelsMemory: 4 Mbits depth per channel
Audio sensitivity0.3 Microns
Ports & slots
Interface typeUSB
Power
Rated voltage110 V
Power typeUSB with DC 5 V / 500 mA
Size & build
Size or dimensions95 × 125 × 25 mm
MountYes
Main materialPlastic
Seal materialSilicone
In the box
Count modesCumulative
Environment & compliance
Working temperature5 ? to 70 ?
Maximum operating temperature70 ?
More details
Equipment typeSignal Analysis
Sampling rate200 MHz
Approvals/standardsFCC / CE / WEEE / RoHS / REACH
Number of digits136
Maximum pressure125 psi
Flow set point15
Flow rate1.5–15 gpm
Gauge glass typeStandard
Data holdYes
Safety ratingFCC / CE / WEEE / RoHS / REACH
Working distanceWorking Voltage: DC 5.5 V
Number of functionsData Contrast / Latch Function / Protocol Analyzer Trigger / Trigger Mark

Questions about this item

What clearance does the 95 x 125 x 25 mm case need on a bench or rack?

Allow at least 95 mm width, 125 mm depth and 25 mm height plus room for probe cables and the USB connector on the rear edge.

Which step do users most often skip when installing the Zeroplus software and driver for the LAP-C 16128?

After plugging the USB cable, run the driver installer before launching the analyser software; otherwise the 16 channels will not appear in the device list.

How often should the flying-lead probe set be inspected or replaced on this 16-channel analyser?

Check the probe tips and insulation before each session; replace any lead that shows cracked insulation or bent pins to keep the ±0.1 V accuracy spec.

More in Test Equipment & Meters

Similar items