Zoeller 131-0001 1/2 HP 115 V 9.4 A Drain Pump System
A 1/2 HP drain pump system with a 5-gallon polypropylene basin moves 72 gallons per minute at 5 feet of head and 45 gallons per minute at 15 feet of head
- Product typeDrain Components
- Main materialHAWA
- 1/2 HP motor delivers strong drainage power
- 115 V operation suits standard household circuits
- 4 A draw ensures efficient energy use
- 72 gpm flow at 5 ft head moves water quickly
- 5 gal polypropylene basin handles high-volume discharge
Drain Pump System 1/2 HP 115 V
The Zoeller 131-0001 is a 1/2 HP drain pump system rated for 115 V and 9.4 A. It uses a vertical float switch with an integral electrical connection. The pump body is cast iron and the impeller is engineered plastic. The polypropylene basin holds 5 gal with a 12-1/5 in. diameter and 10 7/8 in. height.
Suits basement or utility sinks needing automatic
Installers handling grey water from sinks or laundry tubs will find the 72 gpm flow at 5 ft. of head adequate. The 1-1/2 in. inlet and outlet match common drain piping. Buyers who need higher head pressure beyond 15 ft. or a larger basin capacity should look at other models.
Basin and pump arrive assembled for direct placement
The unit sits on a level floor and connects to 1-1/2 in. discharge piping and a 2 in. vent. Float travel must remain unobstructed or the pump will not cycle. Debris in the basin can jam the engineered plastic impeller and reduce flow rates.
How it compares
Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.
- Price $372.99
- Pricier than about 90% of the 4,240 comparable items (median $31.99).
Specifications
| Product | |
|---|---|
| Brand name | Zoeller |
| Model name | 131-0001 |
| Product type | Drain Components |
| Size & build | |
| Main material | HAWA |
Questions about this item
What electrical supply do I need for the 115 V 9.4 A motor?
A standard 115 V AC circuit rated for at least 9.4 A is required to run the pump.
Can the 1-1/2 in outlet connect to my existing 1-1/2 in drain line?
Yes, the 1-1/2 in outlet matches a 1-1/2 in drain line for a direct connection.
How do I confirm the float switch is cycling correctly after installation?
Pour water until the level reaches the float actuation point; the pump should start, move 72 gpm at 5 ft head, then shut off when the basin empties.
More in Drain Stoppers, Strainers & Traps
Similar items
BELL AND GOSSETT 118630 Impeller Steel 4.75 in
- Transparent
Banjo RB300-150 3 inch MNPT x 1-1/2 inch FNPT Reducing Bushing Schedule 80 trap
Red Hat EF8314H301 12V DC 3-Way 2-Position Solenoid Valve 1/4 in
- Drain Components
- HAWA





