Zoeller 30-0021 2" Slip PVC Check Valve
A 2-inch PVC inline swing check valve with neoprene seal, rated for 130°F and 4.30 psi, suitable for horizontal or vertical pump installations
- Product typeDrain Components
- Full-flow design keeps pumps running efficiently
- Inline swing mechanism allows horizontal or vertical mounting
- Neoprene seal rated to 130 degrees F and 4.30 psi
- PVC body and seat resist corrosion in pump applications
- Meets BOCA standard 604.2 for plumbing installations
2-inch PVC Inline Swing Check Valve
This 2-inch slip PVC check valve uses an inline swing mechanism to allow full flow in one direction while preventing backflow. It is built for pump applications where a reliable, non-return valve is required in horizontal or vertical piping runs.
4.30 psi maximum pressure at 130 °F
The valve handles water pressure up to 4.30 psi at a maximum temperature of 130 degrees Fahrenheit. It is not rated for steam service and uses a neoprene seal with a PVC seat to maintain closure under these stated limits.
Replaces worn or missing pump check valves
Install this valve when an existing swing check has failed or when a pump discharge line lacks backflow protection. The jump is worth it when the system operates within the 4.30 psi and 130 °F ratings and requires a full-flow 2-inch PVC connection.
How it compares
Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.
- Price $37.99
- Pricier than about 55% of the 4,240 comparable items (median $31.99).
Specifications
| Product | |
|---|---|
| Brand name | Zoeller |
| Model name | 30-0021 |
| Product type | Drain Components |
Questions about this item
Should I choose the 2" slip PVC model for a standard residential sump pump discharge line?
Yes, the 2 inch slip PVC body matches common residential pump discharge piping and the full-flow design keeps head loss low.
What does the 4.30 psi rating mean when the valve is installed on a typical basement sump system?
It indicates the maximum water pressure the valve can hold at 130 °F; a standard sump pump develops far less pressure, so the valve will not be the limiting factor.
The spec lists clamp x clamp connections — does that restrict the valve to horizontal runs only?
No, the manufacturer rates it for both horizontal and vertical mounting orientations.
More in Drain Stoppers, Strainers & Traps
Similar items
Legris 3140 56 00 Push-Fit Wye Fitting 1/4 in Brass
- Drain Components
- HAWA
Banjo RB300-150 3 inch MNPT x 1-1/2 inch FNPT Reducing Bushing Schedule 80 trap
Dayton 3ZN36 Rigid Shaft Coupling Trap 1.85 in OD 4000 RPM 2600 in-lb
- Drain Components





