Zoeller 30-0048 Silent Combo Swing Check Valve 2in trap
A 2-inch PVC swing check valve with solvent-weld connections that operates horizontally or vertically and reduces pump noise
- Product typeDrain Components
- Main materialPVC
- Silent operation reduces noise with inline swing mechanism
- Full flow design maintains pump efficiency without restriction
- PVC body with rubber seal handles 130 degrees Fahrenheit
- Solvent weld connections allow horizontal or vertical mounting
- Spring-loaded stainless steel ensures reliable closure at 50 psi
Silent Combo Swing Check Valve
The Zoeller 30-0048 is a PVC inline swing check valve designed for pump discharge lines in residential and light-commercial plumbing systems. It accepts solvent-weld connections on both ends and can be mounted horizontally or vertically to suit the piping layout. The rubber seal and stainless-steel spring provide a positive shut-off that stops back-flow when the pump cycles off.
Replaces noisy or leaking swing checks
This unit upgrades an existing 2 in check valve that chatters, fails to seal or restricts flow during high-volume discharge. The full-flow body reduces head loss compared with reduced-port designs, making the swap worthwhile when the current valve causes pump short-cycling or water-hammer noise. It is not intended for steam service or for pressures above the rated limit.
Sustained load behaviour
Under continuous pump operation the valve remains fully open, allowing unrestricted flow at up to 50 psi and 130 Degrees F. The PVC body and rubber seat resist corrosion from typical effluent, while the stainless-steel spring maintains consistent closing force over repeated cycles. California Proposition 65 warnings apply to chemicals in the product materials.
How it compares
Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.
- Price $47.99
- Pricier than about 61% of the 4,240 comparable items (median $31.99).
Specifications
| Product | |
|---|---|
| Brand name | Zoeller |
| Model name | 30-0048 |
| Product type | Drain Components |
| Size & build | |
| Main material | PVC |
Questions about this item
What pipe size and connection type does the 2in trap valve require?
The valve fits a 2-inch pipe with solvent-weld connections on both ends.
How do I orient the valve during installation and what is the common mistake?
Install horizontally or vertically with the flow arrow pointing downstream; the common error is reversing the arrow direction.
When should the rubber seal or stainless-steel spring be inspected or replaced?
Inspect the rubber seal and stainless-steel spring annually or if flow noise increases, and replace if wear or corrosion appears.
More in Drain Stoppers, Strainers & Traps
Similar items
Legris 3113 60 14 Male Elbow 3/8 in Tube 1/4 in Pipe PK10
- Drain Components
- HAWA
Legris 3104 53 00 Union Tee 1/8 in OD 290 PSI PK10
- Drain Components
- HAWA
Banjo RB300-150 3 inch MNPT x 1-1/2 inch FNPT Reducing Bushing Schedule 80 trap
Legris 3109 60 14 Push-Fit Elbow 90 Deg 3/8 Tube 1/4 MNPT Black PK10
- Drain Components
- HAWA





