Zoeller E57 Submersible Sump Pump 3/10 HP 230V 1-1/2" Discharge
A submersible sump pump that moves 34 gallons per minute at 10 feet of head and 19 gallons per minute at 15 feet, with a maximum head of 19 feet and a 1-1/2 inch discharge
- Product typeDrain Components
- Moves 34 gpm at 10 ft head for fast water removal
- Delivers 19 gpm at 15 ft head maintaining strong flow
- Handles 1/2 in solids without clogging the impeller
- Cast iron body and impeller resist corrosion for long life
- Carbon ceramic shaft seal prevents leaks and extends service
3/10 HP 230V Cast Iron Sump Pump
The Zoeller E57 is a submersible sump pump rated at 3/10 horsepower and 230 volts AC. It moves up to 34 gallons per minute at 10 feet of head and 19 gallons per minute at 15 feet of head. The cast iron body and impeller house a carbon and ceramic shaft seal. A nine-foot power cord is included.
Basement drainage without integrated switch
This pump suits installations where a separate float or pressure switch will be provided by the installer. It requires a minimum pit diameter of 18 inches and passes solids up to one-half inch. It is not for systems needing an integrated float switch, for pits smaller than the stated minimum diameter, or for applications requiring a different supply voltage.
19-foot maximum head capacity
The pump develops a maximum head of 19 feet, which determines whether it can lift water to the required discharge elevation. At 4.8 amps and 60 hertz, the motor draws a specific current that the circuit must support. Verify the shut-off head against the total dynamic head of your piping before selecting this model.
How it compares
Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.
- Price $275.99
- Pricier than about 89% of the 4,240 comparable items (median $31.99).
Specifications
| Product | |
|---|---|
| Brand name | Zoeller |
| Model name | E57 |
| Product type | Drain Components |
Questions about this item
What size sump pit diameter is required for the E57 pump?
The pump needs a minimum sump pit diameter of 18 inches to fit and operate correctly.
How is the E57 pump installed and what step is often missed?
The pump is placed in the pit and connected to a 1-1/2 inch discharge pipe; a separate switch must be wired because no switch is included.
What maintenance will the E57 pump need over time?
The carbon and ceramic shaft seal may eventually wear and require replacement to prevent leaks.
More in Drain Stoppers, Strainers & Traps
Similar items
Spears 1829-020 2" PVC Ball Valve Socket FNPT 235 psi
- Drain Components
- HAWA
Banjo RB300-150 3 inch MNPT x 1-1/2 inch FNPT Reducing Bushing Schedule 80 trap
Red Hat 8215G010 Solenoid Valve 2-Way 3/8 in NPTF 120V AC 0-50 psi
- Drain Components





