Zoeller F267 1/2 HP 230V Manual Submersible Sewage Pump
A manual submersible sewage pump with a 1/2 HP hermetically-sealed motor that moves up to 85.0 gpm at 10 ft head and handles 2 in solids
- Product typeDrain Components
- 1/2 HP motor delivers 85.0 gpm at 10 ft head
- Cast iron body resists corrosion in sewage applications
- Handles 2 in solids for reliable waste removal
- Hermetically sealed oil-filled motor prevents fluid intrusion
- 230V operation suits residential and light commercial installations
Manual Submersible Sewage Pump
The Zoeller F267 Waste-Mate is a manual submersible sewage pump built for residential and light commercial waste removal. Its hermetically sealed, oil-filled motor and cast iron body handle solids up to two inches in diameter. The unit operates on 230 volt single-phase power and requires a separate switch for automatic control.
Installers needing a durable non-automatic ejector
This pump suits installers who prefer to select their own float or pressure switch for a custom control setup. It fits basins of at least eighteen inches diameter and delivers strong flow at ten and fifteen feet of head. Buyers who want a pump with an integrated switch or automatic operation built in should look elsewhere.
230 volt manual operation with 1/2 HP motor
The motor runs on 230 volt AC single-phase power and draws 2.60 amps, a key figure for sizing the electrical supply and breaker. No switch is included, so the installer must provide the actuation method. This voltage and manual configuration determine whether the unit matches the site wiring and control scheme.
How it compares
Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.
- Price $576.99
- Pricier than about 90% of the 4,240 comparable items (median $31.99).
Specifications
| Product | |
|---|---|
| Brand name | Zoeller |
| Model name | F267 |
| Product type | Drain Components |
Questions about this item
Does the Zoeller F267 include a float switch or do I need to buy one separately?
The pump is supplied without a switch; no switch is included in the box, so a separate float switch must be purchased for automatic operation.
How do I decide between the 10 ft, 15 ft and 20 ft head ratings when sizing the F267?
Match the pump to your system's total dynamic head: at 10 ft it delivers 85.0 gpm, at 15 ft it delivers 45.0 gpm, and at 20 ft it delivers 10.0 gpm.
What does the 85.0 gpm at 10 ft head mean for actual basement drainage performance?
It means the pump can move 85 gallons per minute when lifting wastewater through 10 feet of vertical head, suitable for typical residential sewage ejection.
More in Drain Stoppers, Strainers & Traps
Similar items
Taco Inc 009-SF5-IFC Trap 1/8 HP 115V 35 ft 10.5 GPM
- Drain Components
Banjo RB300-150 3 inch MNPT x 1-1/2 inch FNPT Reducing Bushing Schedule 80 trap
Bestcare WHFD-6SQ-2NH Square Floor Drain 2" No-Hub Nickel Bronze
- Silver





