Zoro Select 1/4" FNPT x MNPT Galvanized 45 Deg Street Elbow 811026616
A galvanized malleable iron street elbow with 1/4" FNPT x MNPT threads, rated 300 psi at 150°F for Schedule 40 pipe
- Product colorSilver
- Product typePipes, Valves & Fittings
- 45° street elbow routes pipe around tight corners
- Galvanised malleable iron resists corrosion in wet systems
- Class 150 rating handles 300 psi at 150 °F
- Schedule 40 threads seal on standard 1/4" NPT pipe
- Female-to-male ends connect directly without extra couplings
Zoro Select 45° Street Elbow
The Zoro Select 1/4" FNPT x MNPT galvanized street elbow connects a female-threaded pipe to a male-threaded fitting at a forty-five degree angle. It is built from malleable iron with a galvanized finish for corrosion resistance in plumbing installations. This fitting suits residential and light-commercial water, air or gas lines where a directional change is required.
Class 150 Schedule 40 Rating
The elbow meets Class 150 standards for Schedule 40 pipe, providing a maximum operating pressure of 300 psi at 150 degrees Fahrenheit. This single pressure-temperature rating determines whether the fitting matches the system design. Verify the service conditions against these limits before installation.
1/4 Inch Threaded Capacity
The 1/4 inch female and male NPT threads handle typical small-bore distribution branches with comfortable headroom for standard pressure drops. The galvanized malleable iron body resists internal scaling and external moisture in normal service. It is not suited for high-volume mains or systems exceeding the rated pressure and temperature envelope.
How it compares
Measured against everything we stock in Bath Accessories & Soap Dispensers, at today’s prices. Recalculated every night.
- Price $2.99
- Cheaper than about 98% of the 1,499 comparable items (median $39.99).
Specifications
| Product | |
|---|---|
| Brand name | ZORO SELECT |
| Product color | Silver |
| Product type | Pipes, Valves & Fittings |
Questions about this item
How does the 300 psi rating at 150 °F translate to everyday plumbing use?
The fitting is rated for up to 300 psi at 150 °F, so it can handle typical residential water pressure and hot-water lines within those limits.
What does the 1/4" FNPT x MNPT threaded connection mean for compatibility?
One end has a 1/4 inch female NPT thread and the other a 1/4 inch male NPT thread, allowing a direct 45-degree turn between matching NPT pipes or fittings.
What clearance is needed to install the 45-degree street elbow?
The galvanized malleable iron body follows a standard 45-degree street-elbow profile, so allow enough space for the male thread to engage fully and the female side to accept the adjoining pipe.
More in Bath Accessories & Soap Dispensers
Similar items
Broan-NuTone, LLC 413023 Black Non-Ducted Range Hood
- Space Savers
Hercules 90241 jumbo wax toilet bowl ring 3in-4in bathware
- 3 in/4 in
- White





