Zoro Select 11Y733 12V DC 1.21A EU Desktop Charger
Desktop EU plug-in charger delivering 12V DC at 1.21A with negative tip polarity
- Product typePower Quality & Distribution
- European plug fits 230V AC mains
- Delivers 12V DC at 1.21A output
- Compact desktop form at 2.2 x 2.6 x 3.3 in
- 1 x 5.5 mm tip with negative centre polarity
- TUV-GS certified for safety compliance
EU Desktop 12 V Charger
This Zoro Select desktop charger plugs into a 230 V AC European outlet and delivers 12 V DC at 1.21 A through a 2.1 × 5.5 mm barrel tip with negative centre polarity. It is an unregulated supply rated for 50 Hz operation and carries TUV-GS certification.
Thermal and Power Profile
The compact enclosure measures 2.2 in high, 2.6 in wide and 3.3 in deep with no fan, so it runs silently and relies on passive convection for heat dissipation. Under normal load it draws only the power required by the connected device, adding minimal idle consumption to a bench or workstation setup.
Replacement and Upgrade Context
The unit suits technicians who need a direct replacement for a lost or damaged 12 V 1.21 A desktop adapter with the same tip geometry and polarity. It is not suited for applications requiring a regulated output, higher current capacity or a different connector standard.
How it compares
Measured against everything we stock in Meters, Testers & Measuring Tools, at today’s prices. Recalculated every night.
- Price $9.99
- Cheaper than about 91% of the 3,030 comparable items (median $54.99).
Specifications
| Product | |
|---|---|
| Brand name | ZORO SELECT |
| Product type | Power Quality & Distribution |
Questions about this item
How do I connect the Zoro Select 11Y733 charger and which polarity setting must I check?
Plug the EU desktop unit into a 230 V AC socket, then insert the 2.1 x 5.5 x 10 mm barrel tip into the device; the centre pin is negative polarity so verify the device requires negative tip before powering on.
What part of the Zoro Select 11Y733 will need replacement first with daily use?
The 2.1 x 5.5 mm barrel connector and its 10 mm sleeve endure repeated insertion cycles; the spring contacts inside the jack typically fatigue before the internal unregulated 12 V DC circuitry.
At what point does the Zoro Select 11Y733 hit its thermal or current limit during continuous operation?
The unregulated 12 V DC output is rated for 1.21 A; sustained loads above that level cause voltage droop and the compact 2.2 x 2.6 x 3.3 in enclosure reaches its thermal ceiling quickly.
More in Meters, Testers & Measuring Tools
Similar items
Digital Caliper 0-6"/0-150mm Resolution 0.01mm Accuracy ±0.2mm
- Digital caliper





