Zoro Select 24D024 Two-Hole Compression Lug 2 AWG #10 Stud Long Barrel
Two-hole copper compression lug for 2 AWG stranded wire with #10 stud, long barrel, seamless construction, and UL/CSA listing
- Product typeElectrical Connectors
- Two-hole design secures cable with .625 in stud spacing
- Long barrel accepts 2 AWG copper conductor for solid crimp
- Seamless copper construction carries up to 600 V AC at 300 Degrees F
- Brown colour code and die code 33 simplify tool selection
- UL Listed and CSA Certified for code-compliant installations
Two-Hole Compression Lug for 2 AWG Copper
This Zoro Select lug accepts a single 2 AWG stranded copper conductor in a long seamless barrel. It is built for crimp termination and carries CSA and UL listings for code-compliant installations. The brown color code and die code 33 identify the correct tooling. Prop 65 warnings apply.
Rated 600 V AC at 300 Degrees F maximum
The connector handles continuous operation up to 300 Degrees F and 600 V AC in copper-to-copper joints. An inspection hole lets you verify full conductor insertion before energising. The fixed 2 AWG range means larger or smaller wires need a different lug size.
Straight Tongue with #10 Stud Holes on .625
The straight tongue measures .6 in wide and fits #10 studs spaced .625 in center-to-center. It requires a crimp tool matched to die code 33 and a compatible #10 mounting surface. Builders needing a different stud size or hole spacing must select another lug.
How it compares
Measured against everything we stock in Wire, Cable & Wiring Supplies, at today’s prices. Recalculated every night.
- Price $1.99
- Cheaper than about 97% of the 1,610 comparable items (median $25.99).
Specifications
| Product | |
|---|---|
| Brand name | ZORO SELECT |
| Product type | Electrical Connectors |
Questions about this item
Will the .625 in hole spacing on this lug match the existing bus bar I already have?
The lug has a hole center-to-center distance of .625 in, so it will fit bus bars drilled to that same spacing.
How can I confirm the crimp is correct once the lug is installed?
An inspection hole on the barrel lets you verify that the 2 AWG copper conductor is fully seated before you finish the crimp.
Does the package include the crimp die or mounting hardware for the #10 stud?
The lug itself is supplied; a die coded 33 and #10 mounting bolts are not included and must be purchased separately.
More in Wire, Cable & Wiring Supplies
Similar items
Thomas & Betts Blackburn ADR11 Mechanical Connector Lug 1/0-14 AWG
- Aluminum
- 1/0STR-14AWG TERMIN…
PREMIERE RACEWAY PRODUCTS Wire Hider FRA-33414 1-1/2" White Right Angle Self Adhesive
Gardner Bender 25-pack 18-10 AWG red wire connectors
- 18-10AWG CAP CONNEC…
PREMIERE RACEWAY PRODUCTS 53414 1-1/2" Outside Corner White Self Adhesive
Thomas & Betts Blackburn ADR21 Aluminum Lug Terminal 2/0 STR thru 14 AWG
- Aluminum
- 2/0STR-14AWG TERMIN…





