Zoro Select 2VDP1 Nylon Tubing 1/8" OD Black 100 ft
Nylon tubing with 1/8 inch outside diameter and 3/32 inch inside diameter rated for 267 psi at 68 degrees Fahrenheit
- Product colorBlack
- Durable nylon construction resists wear in demanding plumbing applications
- 100 ft continuous length reduces joints and potential leak points
- 267 psi working pressure at 68°F supports high-pressure air or fluid lines
- 175°F maximum operating temperature handles hot-water or heated-air systems
- 3/32 in inside diameter suits precise low-flow metering and instrumentation needs
1/8 in OD nylon tubing for air lines
This 100 ft coil of black nylon tubing has a 1/8 in outside diameter and a 3/32 in inside diameter. It is rated for a maximum operating pressure of 267 psi at 68 degrees F and a maximum operating temperature of 175 degrees F. The Shore D 60 hardness gives it a firm feel suited to pneumatic circuits.
Sustained pressure and vacuum performance
The tubing withstands continuous pressure up to 267 psi at 68 degrees F and handles vacuum down to 28 in Hg without collapsing. Its temperature ceiling of 175 degrees F means it remains stable during extended compressor cycles. It is not rated for peristaltic pump use.
Simple push-fit installation
Cut the tube square with a sharp blade and push it into compatible 1/8 in OD fittings; no clamps or special tools are required. The rigid Shore D 60 wall resists kinking but can crack if bent tighter than its natural radius. Verify fitting compatibility before pressurising the system.
How it compares
Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.
- Price $12.99
- Cheaper than about 78% of the 4,240 comparable items (median $31.99).
Specifications
| Product | |
|---|---|
| Brand name | ZORO SELECT |
| Product color | Black |
Questions about this item
How much heat can the 1/8" OD nylon tubing handle during continuous use?
The tubing is rated for a maximum operating temperature of 175 Degrees F, making it suitable for sustained air-line runs at that temperature.
What fittings or tools are required to connect this 3/32" ID tubing?
You will need barbed or push-to-connect fittings sized for 1/8" outside diameter and 3/32" inside diameter, plus a clean cutter for the nylon material.
Will this Shore D 60 nylon tubing work with older brass compression fittings I already have?
Yes, standard brass compression fittings for 1/8" OD tubing will seal on the nylon, though the harder Shore D 60 material may need slightly more tightening force than softer vinyl.
More in Drain Stoppers, Strainers & Traps
Similar items
As Seen On TV DJAP0006 Pipe Blaster 30 psi drain trap
- ABS Plastic
- Green





