Zoro Select Fuel Tubing PVC 1/8 in ID 1/4 in OD 100 ft Yellow
Yellow PVC tubing carries fuel, lubricant or water at up to 20 psi and 140 °F, with 1/8 in ID, 1/4 in OD and 100 ft length
- Product colorYellow
- Clear fuel flow monitoring with yellow colour coding
- Handles fuels, lubricants and water in one line
- Resists hardening and swelling for longer service life
- Works with peristaltic pumps for versatile transfer
- 20 psi and 140 °F ratings suit low-pressure systems
1/8 in ID PVC Fuel Tubing 100 ft
This yellow PVC tubing has a 1/8 in inside diameter and 1/4 in outside diameter supplied in a 100 ft coil. It is rated for 20 psi maximum operating pressure and 140 Degrees F maximum operating temperature. The material carries a Shore A 60 hardness rating and resists hardening and swelling. It is compatible with peristaltic pumps.
Suits fuel and lubricant lines.
The tubing handles fuels, lubricants and water in low-pressure applications where 20 psi and 140 Degrees F are sufficient. Buyers who need higher pressure ratings or different chemical resistance should look at other products.
20 psi maximum operating pressure decides fit
The 20 psi pressure ceiling is the single specification that determines whether this tubing matches the system requirements. Verify the working pressure of the circuit before purchase.
How it compares
Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.
- Price $26.99
- Cheaper than about 56% of the 4,240 comparable items (median $31.99).
Specifications
| Product | |
|---|---|
| Brand name | ZORO SELECT |
| Product color | Yellow |
Questions about this item
What are the inside and outside diameters of this fuel tubing?
The tubing has an inside diameter of 1/8 in and an outside diameter of 1/4 in.
How do I install this tubing correctly on barbed fittings?
Warm the PVC in hot water to soften it, push fully over the barb until it seats against the fitting body, then secure with a hose clamp; the common error is skipping the warming step and leaving a leak path.
When should I replace this PVC fuel tubing?
Replace it if the material hardens, cracks, swells, or loses its yellow colour, or after prolonged exposure near the 140 °F temperature limit or 20 psi pressure limit.
More in Drain Stoppers, Strainers & Traps
Similar items
Drano Max Gel Drain Clog Remover 695687 80 oz 2 Pack
- 8.75 L x5.75 W x10.…
- Drano - 40109–80 oz…
Yescom USA, Inc. 2 Pack 1 5/8" Pop-Up Drain Chrome
- 1/3
- Chrome
Banjo RB300-150 3 inch MNPT x 1-1/2 inch FNPT Reducing Bushing Schedule 80 trap
Zoeller 10-0763 High Water Alarm Battery Powered trap
- Drain Components





