Zoro Select M16250.060.0001 Wing Nut M6-1.00 Steel Zinc Plated

Zoro Select M6 Wing Nut

The Zoro Select M16250.060.0001 is a metric wing nut designed for hand tightening in general hardware and automotive tasks. Its crescent wings provide grip for tool-free installation and removal. The steel body carries a zinc-plated finish for corrosion resistance. This non-locking fastener suits temporary or frequently adjusted assemblies.

Thread specification M6x1.00

The single critical specification is the M6x1.00 thread size, which must match the mating bolt or stud exactly. It conforms to dimensional standard BS 856 and material quality standard BS 856 CF. The thread is a cold-forged, Class 4 metric coarse pitch. Verifying this pitch and diameter against the host hardware is the only way to confirm fit.

Capacity for light-duty clamping

The wing nut handles light clamping loads typical of Class 4 steel fasteners in non-critical joints. Maximum wing span reaches 26 51/64 mm for leverage, while overall height is 12.9 mm and base diameter is 12 mm. It runs out when joint tension exceeds the proof load of Class 4 material or when a locking feature is required to resist vibration loosening.