Zoro Select ZUSA-HT-1109 PVC Tubing 3/16" ID x 5/16" OD 100 ft
Clear PVC tubing rated for food, beverage and water use, 3/16 in inside diameter, 5/16 in outside diameter, 100 ft coil, Shore A 60 hardness, 25 psi maximum pressure at 140 Degrees F.
- Product colorClear
- Clear tubing lets you monitor flow visually
- Food-grade PVC rated for beverage and water contact
- Shore A 60 hardness balances flexibility with kink resistance
- 100 ft continuous length reduces splice points in long runs
- Peristaltic pump compatible for precise fluid transfer
Clear PVC Tubing for Beverage and Water Lines
Zoro Select ZUSA-HT-1109 is laboratory-grade PVC tubing with a 3/16 inch inside diameter and 5/16 inch outside diameter. The clear material lets you inspect flow visually. It is rated for food, beverage, and water applications and comes in a 100 foot coil for continuous runs.
Thermals Noise and Power Draw in Normal Use
The tubing handles a maximum operating temperature of 140 degrees F and a maximum operating pressure of 25 psi. It contains no moving parts, so it produces no noise and draws no power. Shore A 60 hardness gives it enough rigidity to resist kinking while staying flexible for routing.
Peristaltic Pump Compatibility
This tubing is compatible with peristaltic pumps, allowing precise metering in dispensing or transfer setups. The PVC construction meets requirements for direct food and beverage contact. No jacket or special fittings are included, so you select clamps or barbs that match the 3/16 inch ID and 5/16 inch OD.
How it compares
Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.
- Price $66.99
- Pricier than about 70% of the 4,240 comparable items (median $31.99).
Specifications
| Product | |
|---|---|
| Brand name | ZORO SELECT |
| Product color | Clear |
Questions about this item
How do I install the 3/16 in ID PVC tubing onto a 5/16 in OD barb without kinking it?
Warm the tubing in hot water, push it fully over the barb until it seats against the shoulder, and secure with a hose clamp; avoid twisting during insertion to prevent kinks.
When should I replace the clear PVC tubing based on Shore A 60 hardness and 140 Degrees F max temperature?
Replace if the tubing becomes cloudy, stiff, or develops surface cracks — signs that plasticiser loss or heat exposure has degraded the Shore A 60 material.
What is the first limit reached when running the tubing continuously at 25 psi maximum operating pressure?
The 25 psi pressure rating is the primary limit; sustained operation at or above this pressure can cause the 3/16 in ID tube to burst or leak at fittings.
More in Drain Stoppers, Strainers & Traps
Similar items
Nibco, Inc. T29 Gate Valve 1 1/2 in FNPT Bronze 200 psi
- Drain Components
- HAWA
Anvil 0318901006 Cap Trap 4" FNPT Malleable Iron Class 150
- Drain Components





