Zyvpee 08025SS-24P-AL 80x25mm 24V .17A 3-Wire Inverter Case Fan
An 80 by 25 millimetre case fan with ball bearing and three-wire 24 volt .17 amp power for inverter cooling
- Bearing designBall
- Power input connector3 Wires
- LED lightingNon-LED
- Product typeCase Fan
- Product colorBlack
- Key featuresInverter Cooling Fan
- Ball-bearing design extends operational life
- 24 V 0.17 A rating keeps power draw low
- 80 × 25 mm frame fits standard 80 mm mounts
- Three-wire connector enables speed monitoring
- Non-LED black finish suits low-profile builds
Zyvpee 80mm 24V Inverter Fan
The Zyvpee 08025SS-24P-AL is an 80 by 25 millimetre case fan designed for inverter cooling. It runs on 24 volts and draws 0.17 amps through a three-wire power connector. The ball bearing and black non-LED frame suit industrial or server chassis that need steady airflow.
Suits 24 volt three-wire headers
Builders with a 24 volt three-wire header and an 80 millimetre mounting pattern can install this fan directly. It is not for systems that supply a different voltage, use a four-pin connector, or require a larger frame than 80 by 25 millimetres.
24 volt 0.17 amp three-wire spec
The 24 volt 0.17 amp rating on a three-wire connector is the single figure that decides fit. If the header voltage or pin count differs the fan will not operate. Match those numbers before ordering.
How it compares
Measured against everything we stock in PC Cooling Fans, at today’s prices. Recalculated every night.
- Price $20.99
- Typical for this category: the median of 8,339 items is $19.99.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Zyvpee |
| Product line | 08025SS-24P-AL |
| Model name | 08025SS-24P-AL |
| Product type | Case Fan |
| Product color | Black |
| Power | |
| Power input connector | 3 Wires |
| Size & build | |
| Bearing design | Ball |
| Product dimensions | 80 × 25 mm |
| More details | |
| LED lighting | Non-LED |
Questions about this item
Will the 80mm frame and 25mm thickness fit the same mounting holes as my existing 8025 fan?
Yes — the 80 by 25 mm dimensions match the standard 8025 mounting pattern, so it aligns with the four screw holes used by most 80 mm case fans.
How can I confirm the 3-wire tachometer signal is reporting speed correctly after installation?
Connect the fan to a 24 V header, then check the RPM reading in BIOS or a hardware-monitoring utility; a steady value that changes with load shows the tach wire is working.
Does the box include mounting screws or a 3-pin to 4-pin adapter, or must I source them separately?
The package contains only the fan unit itself; mounting screws and any connector adapters are not included and must be purchased separately.
More in PC Cooling Fans
Similar items
Phanteks PH-F140M25R_G2_DBK01_3P 140mm case fan 3-pack
- 3 Fans
- No Controller
DELTA ELECTRONICS AFB1212GHE-CF00 120mm 38mm 5200 RPM 240.96 CFM 62 dBA case fan
- 1 Fan
- 38 mm
Lian Li 14RSLIN1B 140 mm case fan, black, ARGB, 1600 rpm, 72.7 CFM, 28 dBA
- 140 mm
- 1 Fan
Cooler Master MFW-B2DN-17NPA-R1 MF120 Lite ARGB 120mm case fan
- 1 Fan
- Case Fan





