Zyvpee 2810KL-04W-B39 P51 70x25mm 12V 0.19A 3-pin case fan
A 70 mm ball-bearing case fan with a 3-pin 12 V connector for CPU cooling
- Bearing designBall
- Power input connector3 Pin
- LED lightingNon-LED
- Product typeCase Fan
- Product colorBlack
- Key featuresCPU Cooling
- Ball bearing for long service life
- 70 mm frame fits compact cases
- 12 V 0.19 A draws little power
- Three-pin connector for direct motherboard control
- 25 mm thickness clears tight clearances
Compact 70 mm case fan for tight builds
The Zyvpee 2810KL-04W-B39 P51 is a 70 mm square frame fan designed for small-form-factor chassis or targeted component cooling. Its 25 mm thickness fits standard 7025 mounting holes and the three-pin connector provides basic voltage control on compatible headers.
Ball-bearing airflow with modest headroom
Rated at 12 V and 0.19 A the fan delivers enough pressure for CPU heatsinks or restricted intake paths in compact cases. It will struggle in high-restriction radiators or multi-drive cages where static pressure demands exceed its design envelope.
Quiet operation within low-power limits
The ball bearing runs smoothly at the rated current, keeping acoustic output low during typical desktop loads. Power draw stays at 0.19 A so the fan adds minimal load to a 12 V rail and requires no additional power planning.
How it compares
Measured against everything we stock in PC Cooling Fans, at today’s prices. Recalculated every night.
- Price $23.99
- Pricier than about 60% of the 8,339 comparable items (median $19.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Zyvpee |
| Product line | 2810KL-04 W-B39 P51 |
| Model name | 2810KL-04 W-B39 |
| Product type | Case Fan |
| Product color | Black |
| Power | |
| Power input connector | 3 Pin |
| Size & build | |
| Bearing design | Ball |
| Product dimensions | 70 × 25MM |
| More details | |
| LED lighting | Non-LED |
Questions about this item
Will this 70mm fan fit alongside my existing case fans using the same 3-pin headers?
Yes, it uses a standard 3-pin power connector compatible with typical motherboard headers, and its 70mm frame matches common mounting holes for that size.
How can I confirm the 2810KL-04W-B39 P51 is spinning correctly after installation?
Check the RPM reading in BIOS or fan-control software; the 3-pin connector reports speed so you can verify the ball-bearing motor is running.
Does the 2810KL-04W-B39 P51 include mounting screws or must I supply them?
The supplied photos show only the fan with its 3-wire lead; no screws or extra cables are pictured, so plan to use your own 70mm mounting hardware.
More in PC Cooling Fans
Similar items
Noctua NF-S12A ULN 120mm case fan 800/600 RPM
- 1 Fan
- No Controller
Phanteks PH-F140M25R_G2_DBK01_3P 140mm case fan 3-pack
- 3 Fans
- No Controller
Lian Li 14RSLIN1B 140 mm case fan, black, ARGB, 1600 rpm, 72.7 CFM, 28 dBA
- 140 mm
- 1 Fan
Lian Li UF-SL120-1W 120mm ARGB case fan white single
- 1 Fan
- No Controller





