Zyvpee AA1752HB-AW 170mm AC axial case fan
170 mm AC axial fan with double ball bearing, 2500–2999 RPM, over 80 CFM airflow and 45–50 dBA noise
- Fan size170 mm
- Bearing design2 Ball
- Rotational speed2500-2,999 RPM
- Airflow rate>80 CFM
- Operating noise45–50 dBA
- Power input connector2 Wires
- High airflow of 117 m³/h keeps components cool
- Double ball bearings extend service life
- 170 mm frame fits large chassis openings
- AC 220/240 V supply needs no extra PSU
- Quiet 45–50 dBA operation suits quiet builds
170 mm AC axial case fan
The Zyvpee AA1752HB-AW is a 170 mm AC axial fan designed for case ventilation. It runs on 220/240 V mains power at 50/60 Hz and draws 0.27/0.23 A through a two-wire lead. The unit measures 172 by 51 mm and uses a double ball bearing for rotation.
Suits mains-powered chassis cooling
This fan suits builders who need a 170 mm frame that connects directly to AC power without a motherboard header. It is not for systems that require PWM speed control, a standard 3-pin or 4-pin DC connector, or low-noise operation below 45 dBA. Buyers who want addressable lighting or software fan curves should look elsewhere.
Simple two-wire installation
Installation consists of wiring the 270 mm tinned leads into a suitable AC circuit; no motherboard header is involved. The bare-wire ends demand basic electrical knowledge and proper insulation to avoid shorts. The 51 mm thickness may conflict with tight side-panel clearance, so verify internal depth before mounting.
How it compares
Measured against everything we stock in PC Cooling Fans, at today’s prices. Recalculated every night.
- Price $68.99
- Pricier than about 90% of the 8,339 comparable items (median $19.99).
- Fan size 170 mm
- Higher than about 91% of the 1,114 comparable items (median 120 mm).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Product line | AA1752HB-AW |
| Model name | AA1752HB-AW |
| Product type | Case Fan |
| Product color | Black |
| Performance | |
| Rotational speed | 2500-2,999 RPM |
| Airflow rate | >80 CFM |
| Power | |
| Power input connector | 2 Wires |
| Size & build | |
| Fan size | 170 mm |
| Bearing design | 2 Ball |
| Product dimensions | 172 × 51 mm |
| Compatibility | |
| Compatible with | Case |
| Environment & compliance | |
| Operating noise | 45–50 dBA |
| More details | |
| LED lighting | Non-LED |
Questions about this item
What power source must I already have available to run this 220/240V AC axial fan?
You need a mains-voltage supply of 220–240 V at 50/60 Hz single-phase; the fan draws 0.27 A at 50 Hz or 0.23 A at 60 Hz and terminates in two bare-tinned wires 0.5 cm long after a 270 mm lead.
Will this 172 × 51 mm frame fit the same mounting holes as my existing 170 mm DC fans?
The housing measures 172 mm square by 51 mm deep, so hole spacing matches common 170 mm patterns, but the 2-wire AC connection cannot plug into a standard motherboard fan header used by DC fans.
How can I confirm the fan is operating correctly once wired to mains?
At full voltage the motor should spin at roughly 3000 RPM, move about 117 m³/h of air and produce approximately 50 dBA of noise, with the double ball bearings running smoothly.
More in PC Cooling Fans
Similar items
Phanteks PH-F140M25R_G2_DBK01_3P 140mm case fan 3-pack
- 3 Fans
- No Controller
SXDOOL Ikura R12D5W-155 120mm 200V 220V AC 50/60Hz 16/15W 120x120x38mm case fan
Lian Li 14RSLIN1B 140 mm case fan, black, ARGB, 1600 rpm, 72.7 CFM, 28 dBA
- 140 mm
- 1 Fan





